George Vondriska talks about why he likes using a saddle square on his woodworking projects that require wrapping guidelines around a corner. You’ll be amazed how much easier it is than using a conventional square!
You Might Also Enjoy
-
2:55Choosing a Brush for Your Top Coat
You’ve spent a lot of time on your project getting it ready to finish, so why not finish it right? If you’re going to apply four layers of stains or top coat with a brush, it’s important to use the proper brush for the job. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
2:04Board Foot Measure
George Vondriska provides tips on how to formulate the board foot measure of hardwood so that you can better assess how much wood you’ll need for your woodworking project and better communicate with the salesman when you go to purchase your wood. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
1:32Anti-Dust Finishing Tip
Most woodworkers have some airborne dust and particulates floating in their shop, and some of those particles can settle on a not-quite-dried finish. George Vondriska demonstrates a neat and inexpensive trick for protecting small woodworking projects from dust when finishing. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
8:38Cutting Lumber from Logs
George Vondriska provides tips on using a backyard sawmill to cut lumber from logs for your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video. Sawmill provided by Logosol. For more information, visit www.logosol.us.
Watch Now >>
Hi George, Love your site. The short commercials are tolerable, but with premium membership those 20-30 second commercials are pretty cumbersome.
We would like to let you know that your feedback has been forwarded to the proper department. Your comments are important to us and help with the development of our online video streaming community.
Good start on using the saddle square, George, but if you want ACCURATE layout, use your marking knife with the saddle square. Supplement your pencil marks on your story pole with a knife tick on the edge. Use this tick mark to align with your work pieces using the saddle square. Now all of your pieces will have dead-on alignment of their layout marks.
I have this saddle square and love it!
I love the marking knife idea, and use it pretty frequently. Unfortunately scribes don’t show up on camera. But it would have been worth a mention in this video. Thanks for bringing it up.
I have a saddle square from Bridge City Tool Works, which has the advantage of folding in the middle, which allows marking lines on a piece where the two sides are not 90 degrees. Very useful tool.
I really liked the idea of a saddle square being ‘adjustable’, so took a look around the net and it seems that Bridge City Tool Works has discontinued them… The plain black and inlaid styles are-were nice looking, but a bit pricey for many of us IMO… http://www.bridgecitytools.com/default/catalogsearch/result/index/?p=1&q=saddle+square&x=0&y=0 Take care of yours Dene as it looks like you won’t be getting a replacement any time soon…
I use the center-finding head from my Starrett rules. It works quite well, and I can save some cash because of it’s dual use capability.
I’ve had one for years and it’s useful enough to me that I keep it in the pocket of my apron along with a utility knife and not much else.
Thanks George. I have never gone to the expense of purchasing one of these since I have a “center finder” attachment for one of my combination squares. When I replaced the square, I kept the attachment to use for layout just as you showed.
Dan