A drawer lock joint is a very strong joint and perfect for use on dresser drawers. George Vondriska shows a great way to create a drawer lock joint using a table saw in this DIY drawers video. He demonstrates the correct setup to create both the groove and tongues required for this useful joint.
You Might Also Enjoy...
-
2:32Re-Purpose Worn Push Pads
George Vondriska teaches you a great way to refurbish the push pads you use in your workshop. Instead of just tossing your old push pads out, George recommends cutting off the rubber padding from the bottom of the pad, and screwing the plastic handle to a piece of scrap wood, which you can turn into…
Watch Now >> -
1:038mm Shanked Router Bits
Did you know that your woodworking router can actually hold and use 8mm shanked router bits? Not 1/4″, not 1/2″, but 8 mm. Master woodworker George Vondriska discusses the calculated method to the madness, and introduces a must-have tool that will allow 8 mm shanked router bits to work in your router. Learn all about…
Watch Now >> -
3:46Three Common Types of Sheet Stock
George Vondriska discusses some of the advantages and disadvantages of the common types of sheet stock you might use in your shop. He’ll teach you what to look for so that you know which material is best for your project, whether its plywood, MDF or melamine. You’ll learn how each type of stock is made,…
Watch Now >> -
2:49Acrylic and Polycarbonate Glass
Have you ever wondered what the differences are between acrylic and polycarbonate glass? George Vondriska explains what sets them apart and discusses some of the various woodworking projects that require each type. Watch and learn which type factors into your next woodworking plans.
Watch Now >>
