George Vondriska teaches you how to create a simple custom-dimension tapered leg jig for your woodworking projects that require tapered chair or table legs. He walks you through the building process, demonstrating the proper technique for transferring a cut angle from your leg to the jig, adding a retaining block to the bottom, and attaching a toggle clamp to hold your leg in place.
-
4:05
Biscuit Joiner on a Router
Can you cut biscuit joints on the router table you use for your woodworking projects? Sure, but you’ll need to know the steps to get the fit right. Our master woodworker George Vondriska explains the setup of the router as a biscuit joiner and shows you how to make the cuts.
Watch Now >> -
6:36
Bridge Over Broken Guitar
Is the bridge of your guitar separating from the guitar top? You can save big bucks by making the repair yourself. You probably already have all the woodworking tools you need in your shop to fix the broken guitar, and if you follow master woodworker George Vondriska’s step-by-step directions in this video, you’ll gain all…
Watch Now >> -
5:41
Cutting Plugs and Using Plug Cutters
Make nearly invisible covers for screw heads with plugs cut from the same wood as your woodworking project. George Vondriska guides you through the procedure for cutting plugs using a drill press, plug cutter bit, bandsaw and George’s secret weapon: masking tape.
Watch Now >> -
2:40
Check for Slipping Router Bit Collet
Router bit collets do wear out, but it can be difficult to tell when. In this woodworking instructional video, master woodworker George Vondriska teaches you how to confirm that your jig’s router bit collet is still properly holding router bits without slipping.
Watch Now >>