Tool actuated vacuums are an excellent way to keep your woodworking shop clean and free of sawdust. George Vondriska recommends this type of vacuum because you can plug a portable power tool directly into the machine, so the vacuum turns on and off with the tool and you don’t have to worry about dust filling up your shop floor.
If you’ve ever tried to clamp two pieces together that are cut at less than a 90-degree angle, you know how difficult it is to keep the joint from sliding around before it dries. George Vondriska has a neat trick to resovle this clamping challenge using clamp blocks. A WoodWorkers Guild of America (WWGOA) originalWatch Now >>
You’ve spent a lot of time on your project getting it ready to finish, so why not finish it right? If you’re going to apply four layers of stains or top coat with a brush, it’s important to use the proper brush for the job. A WoodWorkers Guild of America (WWGOA) original video.Watch Now >>
George Vondriska provides tips on how to formulate the board foot measure of hardwood so that you can better assess how much wood you’ll need for your woodworking project and better communicate with the salesman when you go to purchase your wood. A WoodWorkers Guild of America (WWGOA) original video.Watch Now >>