Building a guitar is an excellent test of a skilled woodworker’s craftsmanship, but if you’re like most people, you probably want to skip the long woodworking processes of shaping and sanding the body. So master woodworker George Vondriska gives you a quick rundown on a couple ready-made guitar kits that are available for you to choose and tells you just how much woodworking skill is needed to complete each kit guitar.
Tags: Premium Videos
You Might Also Enjoy...
-
1:08Good joinery starts with surfaces that mate perfectly without use of clamp pressure. If excessive clamping pressure is used to pull the joint together, it will create stress on your woodworking project that can cause distortion or even splitting to occur. Master woodworker George Vondriska explains how to incorporate a “dry run” into your process
Watch Now >> -
4:05Can you cut biscuit joints on the router table you use for your woodworking projects? Sure, but you’ll need to know the steps to get the fit right. Our master woodworker George Vondriska explains the setup of the router as a biscuit joiner and shows you how to make the cuts.
Watch Now >> -
5:02Woodworkers drill holes in wood all the time but hesitate when it comes to cast iron. Threaded holes in cast iron machine tables are just the solution you need for holding jigs and fixtures. George Vondriska shows how to cut a threaded through or blind hole in cast iron with a center punch, drill, tap
Watch Now >> -
5:41Make nearly invisible covers for screw heads with plugs cut from the same wood as your woodworking project. George Vondriska guides you through the procedure for cutting plugs using a drill press, plug cutter bit, bandsaw and George’s secret weapon: masking tape.
Watch Now >>
