Using a plunge router and setting the depth of cut is easy, provided you know a few tricks. It can be done using bar stock, a drill bit, or even shop-made spacers. Have a look at this video and you’ll learn some great tips for accurately setting depth of cut.
Good joinery starts with surfaces that mate perfectly without use of clamp pressure. If excessive clamping pressure is used to pull the joint together, it will create stress on your woodworking project that can cause distortion or even splitting to occur. Master woodworker George Vondriska explains how to incorporate a “dry run” into your process…Watch Now >>
Have you ever wondered what the differences are between acrylic and polycarbonate glass? George Vondriska explains what sets them apart and discusses some of the various woodworking projects that require each type. Watch and learn which type factors into your next woodworking plans.Watch Now >>
You may just have found a new home for your old, worn out socks. Dave Munkittrick gives a quick and handy woodworking tip to prevent clamp scars that can damage your wood. Socks can help avoid the crippling effects that hand clamps are liable to have on your woodworking projects.Watch Now >>
George Vondriska demonstrates a unique way to color wood using a simple iron acetate solution that creates a chemical reaction with the natural tannins in wood. If you are using a wood species with a low level of tannin, George shows you the process for adding tannins so that the iron acetate will have a…Watch Now >>