George Vondriska shows you how to trim edge banding for your woodworking projects using a router table. A WoodWorkers Guild of America (WWGOA) original video.
You Might Also Enjoy...
-
6:00Captive Ring Out of Spindle Turning
There aren’t many woodworking techniques that will draw more ooh’s and aah’s from your woodworking buddies than a captive ring turned on a spindle. George Vondriska demonstrates the mysterious technique in this clip. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
1:32Anti-Dust Finishing Tip
Most woodworkers have some airborne dust and particulates floating in their shop, and some of those particles can settle on a not-quite-dried finish. George Vondriska demonstrates a neat and inexpensive trick for protecting small woodworking projects from dust when finishing. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
1:48Coiling a Bandsaw Blade
George Vondriska demonstrates how to properly coil and store a large band saw blade for DIY woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
5:23Plunge vs. Fixed Based Routers
George Vondriska demonstrates the difference between plunge and fixed based routers. A WoodWorkers Guild of America (WWGOA) original video. For more woodworking videos, please visit www.wwgoa.com!
Watch Now >>
This seems pretty scary especially if you are trimming a vennered panel you just spent days creating. One tip or slip and all your work is ruined. It seems that a much more fool-proof method would to simply use a cutter with a bearing on top. This way, your work is guaranteed to to not go any deeper than the bearing. That is what these bits are made for.