George Vondriska provides essential tips and techniques for reducing chipping while crosscutting plywood. Scoring the plywood with a straight edge and utility knife first and then crosscutting, will result in cleaner edges on your plywood. Follow George’s helpful hints to optimize your cut quality. Your woodworking skills will greatly improve when practicing these techniques.
Tags: Cross cutting plywood, Premium Videos, Reduce chipping when cross cutting plywood
You Might Also Enjoy...
-
1:08Good joinery starts with surfaces that mate perfectly without use of clamp pressure. If excessive clamping pressure is used to pull the joint together, it will create stress on your woodworking project that can cause distortion or even splitting to occur. Master woodworker George Vondriska explains how to incorporate a “dry run” into your process
Watch Now >> -
5:41Make nearly invisible covers for screw heads with plugs cut from the same wood as your woodworking project. George Vondriska guides you through the procedure for cutting plugs using a drill press, plug cutter bit, bandsaw and George’s secret weapon: masking tape.
Watch Now >> -
2:14Have you ever wanted the ability to raise and lower the benches in your woodworking shop while working on various projects? George Vondriska shows you how valuable and easy it is to have an adjustable bench in your shop.
Watch Now >> -
4:05Can you cut biscuit joints on the router table you use for your woodworking projects? Sure, but you’ll need to know the steps to get the fit right. Our master woodworker George Vondriska explains the setup of the router as a biscuit joiner and shows you how to make the cuts.
Watch Now >>
