I love sharpening my lathe chisels on a grinder. It makes for fast sharpening, which means I can get back to my lathe turning quickly. When it comes to sharpening chisels, as opposed to shaping, a metal edge, a low rpm grinder offers a lot of advantages. There are uses for high speed grinders too, but it’s very important to understand the applications and differences between each machine.
-
2:40
Check for Slipping Router Bit Collet
Router bit collets do wear out, but it can be difficult to tell when. In this woodworking instructional video, master woodworker George Vondriska teaches you how to confirm that your jig’s router bit collet is still properly holding router bits without slipping.
Watch Now >> -
2:14
Build Your Own Adjustable Woodworking Bench
Have you ever wanted the ability to raise and lower the benches in your woodworking shop while working on various projects? George Vondriska shows you how valuable and easy it is to have an adjustable bench in your shop.
Watch Now >> -
2:56
Bending Wood with a Hot Pipe
Bending wood is one of those techniques that can have a dramatic effect on a woodworking project, but many woodworkers shy away from it because it seems intimidating. Watch this demonstration by our expert woodworker George Vondriska to learn a simple, worry-free approach to bending wood quickly using a heated iron pipe.
Watch Now >> -
2:32
Re-Purpose Worn Push Pads
George Vondriska teaches you a great way to refurbish the push pads you use in your workshop. Instead of just tossing your old push pads out, George recommends cutting off the rubber padding from the bottom of the pad, and screwing the plastic handle to a piece of scrap wood, which you can turn into…
Watch Now >>