Cut, don’t scrape your way to better bowl turning. George shows you how to get cleaner, faster cuts with less sanding with a 3/8″ bowl gouge. You’ll learn critical body position and movement along with a neat trick for kick free starts on the bowl rim.
-
1:03
8mm Shanked Router Bits
Did you know that your woodworking router can actually hold and use 8mm shanked router bits? Not 1/4″, not 1/2″, but 8 mm. Master woodworker George Vondriska discusses the calculated method to the madness, and introduces a must-have tool that will allow 8 mm shanked router bits to work in your router. Learn all about…
Watch Now >> -
2:29
Belt Sander Bench Mount
Turn your belt sander into a stationary machine. Master woodworker George Vondriska shows you the simplest way to construct a jig that will hold a belt sander securely to your workbench, making it easier and safer to sand typically difficult woodworking projects like small toy parts and irregular shapes.
Watch Now >> -
2:40
Check for Slipping Router Bit Collet
Router bit collets do wear out, but it can be difficult to tell when. In this woodworking instructional video, master woodworker George Vondriska teaches you how to confirm that your jig’s router bit collet is still properly holding router bits without slipping.
Watch Now >> -
4:05
Biscuit Joiner on a Router
Can you cut biscuit joints on the router table you use for your woodworking projects? Sure, but you’ll need to know the steps to get the fit right. Our master woodworker George Vondriska explains the setup of the router as a biscuit joiner and shows you how to make the cuts.
Watch Now >>