George Vondriska teaches you how to utilize a pair of large grout floats as push pads for face jointing. The material on the pads is perfect for gripping the surface of the wood so that you can apply the right amount of pressure and make a clean joint.
You Might Also Enjoy...
-
2:32Re-Purpose Worn Push Pads
George Vondriska teaches you a great way to refurbish the push pads you use in your workshop. Instead of just tossing your old push pads out, George recommends cutting off the rubber padding from the bottom of the pad, and screwing the plastic handle to a piece of scrap wood, which you can turn into…
Watch Now >> -
1:47Building a Kit Guitar
Building a guitar is an excellent test of a skilled woodworker’s craftsmanship, but if you’re like most people, you probably want to skip the long woodworking processes of shaping and sanding the body. So master woodworker George Vondriska gives you a quick rundown on a couple ready-made guitar kits that are available for you to…
Watch Now >> -
2:40Check for Slipping Router Bit Collet
Router bit collets do wear out, but it can be difficult to tell when. In this woodworking instructional video, master woodworker George Vondriska teaches you how to confirm that your jig’s router bit collet is still properly holding router bits without slipping.
Watch Now >> -
2:56Bending Wood with a Hot Pipe
Bending wood is one of those techniques that can have a dramatic effect on a woodworking project, but many woodworkers shy away from it because it seems intimidating. Watch this demonstration by our expert woodworker George Vondriska to learn a simple, worry-free approach to bending wood quickly using a heated iron pipe.
Watch Now >>
