George Vondriska teaches you a neat trick for burning accent lines into a dabble while it spins on the woodworking lathe. He recommends using recycled guitar strings pulled tight across the spinning piece. This will create friction and in turn burn lines into the gardening tool or any other project you may build.
When working on your woodworking project, have you ever wondered why most dovetail jigs are a two-bit operation? Woodworking expert George Vondriska explains how through-pins and tails are cut on a jig, and when to use each of the two cutters required for the process. He also discusses why it’s so important to match theWatch Now >>
Can you cut biscuit joints on the router table you use for your woodworking projects? Sure, but you’ll need to know the steps to get the fit right. Our master woodworker George Vondriska explains the setup of the router as a biscuit joiner and shows you how to make the cuts.Watch Now >>
Bending wood is one of those techniques that can have a dramatic effect on a woodworking project, but many woodworkers shy away from it because it seems intimidating. Watch this demonstration by our expert woodworker George Vondriska to learn a simple, worry-free approach to bending wood quickly using a heated iron pipe.Watch Now >>