Lathe Safety: Face Shield vs. Respirator

Duration: 3:55

Ready to do some turning? Keep lathe safety in mind. You’ve got to wear a face shield to protect your face and eyes. When you get to the sanding step you also need to protect your lungs, something a face shield alone won’t do. Check out this video to learn more about face shield/respirator combos.

Reply to Mike Hunter
  • (will not be published)

14 Responses to “Lathe Safety: Face Shield vs. Respirator”
  1. Guest

    That’s the Trend Airshield Pro. It comes with or without attached earmuffs. You can get it lots of places (Woodcraft,, etc.). The model he has runs about $365.

  2. Richard Slosky
    Richard Slosky

    I love the site’s videos and articles. Thanks for producing them. I
    have read that if you use a face shield while working on a lathe, that is not enough to protect
    your eyes and you need to also ware safety glasses. Can you please
    comment on this.

    • WWGOA Team
      WWGOA Team

      Hi, Richard! I think that a good face shield is enough protection. But if there’s any doubt, doubling up the protection with safety glasses is a great idea.

  3. Calvin Arterberry
    Calvin Arterberry

    I am newto woodworking. I have watched a ton of videos of turning and scroll sawing. I had not seen the respirator mask in use until I watched George use one. I kept noticing that he would put on this mask and I heard the suction kick in with it. Interesting…I thought. I’ve been using my scroll saw quite a bit lately and I use my black and decker rotary tool to do most of my sanding for the end result of my projects. I currently use a half face filter with the pink filters. It does the trick but it gets a bit uncomfortable after an hour of use. I’m going to check into these respirators. They look comfortable but maybe just a bit heavy. I received my new PSI lathe about a month ago and just starting to pilfer around with it. One might come in real handy around my little 10×13 unvented shop.

  4. John

    I love the protection it provides both for flying objects and dust however there are two issues that need attention. (1) The grade of the plastic is lacking in the area of static control and scratch resistance. The additional stick-on shield does help protect from scratches but does nothing for the static control. Also after you replace the plastic stick-on it is near impossible to get a complete seal and this results in a visible distortion. (2) The low battery signal cannot be cut off and comes on after a short usage but the battery will still provide power for at least another 6 hours.

  5. Mark Hendrickson
    Mark Hendrickson

    I have an older similar piece. Battery is worn on the belt–but I still sometimes find it top heavy. For those of us with beards, it’s the best way to go as nothing really seals well with a beard.

  6. Bob

    Hi George, What are your thoughts of sharing this device in a shared wood-shop? Thanks Bob

    • Customer Service
      Customer Service

      Hi Bob. Hmmm….it’s probably ok. I’m certainly not squeamish, or any kind of germaphobe. But in all honesty, I personally would feel weird about putting my face inside a respirator that a number of other people have been breathing inside of. Maybe you could find something to treat the interior of the respirator with. Kind of like people wiping equipment down at a public gym.

  7. Mike Hunter
    Mike Hunter

    Have had a Trend for 3 years. It died on me recently, looking to replace and want to know what my options are.

    • Customer Service
      Customer Service

      Hi there Mike!

      We’d love to help!

      The ‘Ask an Expert’ section is currently for members to our online community. We do have a promotional offer if you are interested. This would include access to expert advice (like this), plus discounts, hours of Premium videos, etc. Please feel free to take a look. You can message us right back with your question if you decide to become a member and you will have a response within 1-2 business days from our experts!

      Please follow the steps below to receive the annual membership at the introductory rate:

      1. Click on the email link:
      2. Click on the Premium Membership offer.
      3. The Checkout page will display your Premium Membership purchase.
      4. Fill in your Billing Details and create an account password.
      5. Fill in your debit/credit card information.
      6. Finish by clicking Complete Order.

      If you have any further questions, please contact Customer Service at 1-855-253-0822 at your earliest convenience, or chat with us on our site.

      We greatly appreciate your business!


      Woodworkers Guild of America Video Membership