George Vondriska demonstrates why you might consider using a foot pedal to control your power sharpener when power lapping a bench chisel. Because you want the chisel flat against the surface of the sharpener to get an even grind, you’ll need to use both hands to guarantee that it doesn’t wobble.
You Might Also Enjoy...
-
2:40Check for Slipping Router Bit Collet
Router bit collets do wear out, but it can be difficult to tell when. In this woodworking instructional video, master woodworker George Vondriska teaches you how to confirm that your jig’s router bit collet is still properly holding router bits without slipping.
Watch Now >> -
1:47Building a Kit Guitar
Building a guitar is an excellent test of a skilled woodworker’s craftsmanship, but if you’re like most people, you probably want to skip the long woodworking processes of shaping and sanding the body. So master woodworker George Vondriska gives you a quick rundown on a couple ready-made guitar kits that are available for you to…
Watch Now >> -
2:32Re-Purpose Worn Push Pads
George Vondriska teaches you a great way to refurbish the push pads you use in your workshop. Instead of just tossing your old push pads out, George recommends cutting off the rubber padding from the bottom of the pad, and screwing the plastic handle to a piece of scrap wood, which you can turn into…
Watch Now >> -
3:36Clamping Biscuits
It’s time to drop your standard woodworking clamps and check out these clamping biscuits. Master woodworker George Vondriska teaches you how they work and how they can be an easy solution in your woodworking shop for some of those more difficult-to-clamp joints.
Watch Now >>
