There are advantages to working with green wood, but its tendency to crack as it dries is a definite down side. One solution for this is chemically treating the wood to stabilize the material.
Related Videos:
You Might Also Enjoy...
-
1:47Building a Kit Guitar
Building a guitar is an excellent test of a skilled woodworker’s craftsmanship, but if you’re like most people, you probably want to skip the long woodworking processes of shaping and sanding the body. So master woodworker George Vondriska gives you a quick rundown on a couple ready-made guitar kits that are available for you to…
Watch Now >> -
1:08Checking Joint Quality
Good joinery starts with surfaces that mate perfectly without use of clamp pressure. If excessive clamping pressure is used to pull the joint together, it will create stress on your woodworking project that can cause distortion or even splitting to occur. Master woodworker George Vondriska explains how to incorporate a “dry run” into your process…
Watch Now >> -
1:038mm Shanked Router Bits
Did you know that your woodworking router can actually hold and use 8mm shanked router bits? Not 1/4″, not 1/2″, but 8 mm. Master woodworker George Vondriska discusses the calculated method to the madness, and introduces a must-have tool that will allow 8 mm shanked router bits to work in your router. Learn all about…
Watch Now >> -
2:56Bending Wood with a Hot Pipe
Bending wood is one of those techniques that can have a dramatic effect on a woodworking project, but many woodworkers shy away from it because it seems intimidating. Watch this demonstration by our expert woodworker George Vondriska to learn a simple, worry-free approach to bending wood quickly using a heated iron pipe.
Watch Now >>
