Thanks to all the folks who joined us for the CNC LIVE stream. If you missed it, no problem, you can watch it here. We talked about CNC machines in general and the jargon associated with them, different approaches for making signs, working with material besides wood on the CNC, and router bit selection. Lots of great info.
Thanks for watching, and providing all your great questions. The live streams are a lot of fun. From table saw to planer to hand cut mortises, we covered a lot of ground. :40 George’s bad joke 1:25 Kauri Wood 5:12 Cutting mortises. Hand cut techniques 10:12 Allowing for wood movement in solid panels 13:36 SandingWatch Now >>
We had a guest for this session: Joni Van Dusartz. Joni has been woodworking for over 20 years, including running a commercial cabinet shop. From CNC to finishing, Joni has a lot of woodworking experience. She brought along some of her intarsia for “show and tell,” which lead to some great questions. :24 Intro ofWatch Now >>
We had one little technical glitch, but overall the WWGOA LIVE went great. Thanks to those who joined us. Here’s what we covered. 0:45 Aspen cupped when sealed with water based finish 4:15 How smooth should tenons be? 7:13 Quartersawn four sides 13:46 Bandsaw box blanks 16:20 Reducing hose size on a shop vacuum 19:15Watch Now >>
The luck of the Irish was with us, we had no technical issues at all. Here’s what we covered, and where you can find it in the archived video. 1:03 Books on rustic furniture 2:15 Mixing dye with stains/preconditioning wood 8:20 Drilling holes for marbles in games boards 11:20 User friendly CAD software (WWGOA SketchUpWatch Now >>