Stationary Power Tools
-
10:56The table saw is at the heart of most woodworking shops, so it’s VERY important that you use it correctly and safely. In this video we’ll demonstrate safe ripping and crosscutting on a Laguna Fusion 1 table saw. We’ll cover: – Blade selection, ripping versus crosscutting – The importance of a riving knife – Body…
Watch Now >> -
9:28Let’s say you’re working on a project that requires some cove molding, and your lumber yard doesn’t carry the size that you need. Or maybe you are using an unusual species such as honey locust that you cut down from your neighbor’s yard one evening, and there’s no way that you will find cove molding…
Watch Now >> -
2:20A drill press provides a great way for drilling holes, but sometimes isn’t capable of doing quite what you want it to do. When it comes to drilling tiny holes, anything 1/16” or less, many drill presses can’t help you. The chuck simply doesn’t get small enough to securely hold little bits. And that’s a…
Watch Now >> -
5:00Setting angles on your tools can be a little tricky, and getting the angles just right is very important. If you’re doing something like stave construction, or any multi-sided item, being off just a few degrees on the set up can lead to disastrous results. But if you own a smart phone, the answer for…
Watch Now >> -
4:11One of the most common questions we get at WWGOA is about using the jointer, and not getting parallel faces or edges from the jointing process. It’s important to understand what jointers do and don’t do. Once you get this, you’ll be better able to get what you want from your jointer. Jointers Excel At……
Watch Now >> -
4:45If your jointer is leaving a divot on the trailing edge of your work piece, it will not only drive you crazy, but it will produce unsightly blemishes on your projects. As you face joint your pieces, that divot will invariably end up in a visible place on your table top or other prominent location.…
Watch Now >> -
3:00When you’re planing a board to thickness, there’s a little more involved than simply shoving the board through your planer. To get the best possible result, in regards to board stability, you should follow a specific sequence of events. What we’re after We have a couple of goals when we’re planing wood. One, of course,…
Watch Now >> -
5:35Every now and then our woodworking requires us to rip a work piece to a polygon shape on the table saw. Perhaps you want to cut a pentagon, hexagon, octagon, nonagon, or any other polygon, for a fancy table leg or a post. This can be an intimidating, or even frightening requirement, and if you…
Watch Now >> -
4:13If you need to rip a cylinder in half or quarters for a project, watch this video first. It can be a very dangerous activity if you do not take the necessary precautions. If you attempt to free-hand this cut on a table saw, the cylinder will inevitably roll slightly, creating a binding condition at…
Watch Now >>
