Tips for Storing and Organizing Clamps

Duration: 4:54

Clamps, clamps, everywhere a clamp. If you’re lucky. 🙂 Yeah, George stores A LOT of clamps because of the classes he teaches, but even if you don’t own the boat load of clamps that he does, you’ll find this a very easy way to get started organizing clamps.

The challenge

Clamps are very heavy, and you probably have a variety of sizes and types. This can make organizing clamps a big challenge. The storage system has to be robust enough to tolerate the weight, and versatile enough to accept different sizes. It also needs to be easy to grab clamps as you need them, and put them away when you’re done. One of the systems George shows you is fastened to the wall. The other only leans against the wall, so your clamp storage could be moved if your organizational or clamp storage needs change.

The systems

Everything you need for these solutions to organizing clamps can be found at a home center. The rack that leans against the wall is made from ¾” plywood, and the hangers for the “F” style clamps are made from plumbing pipe, and a variety of plumbing components. A 10-degree angle on the leaning rack gives it enough angle to stay put against the wall, once the clamps are on it. George’s leaning rack is a full 8’ long, but you can size yours to fit your needs.

More storage solutions

Most of us have more to organize than just our clamps. Check out these tips on storing wood. It also take advantage of home center items. If you’ve got things you want to put away, you should have a look at How To Build Shop Storage Cabinets.

Reply to Dennis
  • (will not be published)

6 Responses to “Tips for Storing and Organizing Clamps”
    • George Vondriska
      George Vondriska

      Thanks. I’ve got a similar set up on the ends of my workbench for clamps I keep there.

  1. Steven

    I live in an earthquake-prone area, so I would not depend on simply leaning a rack against a wall at a 10 degree angle. Everything in my shop (and most things in my house) are attached in some way to a structural member. Of course, if a really big one hits it’s all going to be rubble, but even minor “shakers” can knock down things that aren’t solidly attached.
    Great clamp system, George!

    • George Vondriska
      George Vondriska

      Yeah, that’s a consideration I don’t have to worry about in Wisconsin. My biggest rumble is from a tractor pulling a load of corn going by.

  2. James Sanders
    James Sanders

    Great ideas. Question: For the “flange and pipe” holders solution, could these be attached to blocks of wood as part of a French Cleat system?

    • Customer Service
      Customer Service

      Hi James. Sure. I don’t see any problem with doing that.
      Paul-Woodworkers Guild of America