Bundle

Woodworking Tricks of the Trade 9-DVD Set + FREE Wixey Digital Calipers

$55.00

You Save 50%
Item: D1055Q

Bundle: Woodworking Tricks of the Trade 9-DVD Set + FREE Digital Calipers

In this premier woodworking 9-DVD set, George Vondriska and our team of professional craftsmen present you with nearly 12 hours of shop-tested tips and techniques that you can use to expertly plan, craft and finish your next woodworking project. We’ve created the best in-depth tutorials on essential woodworking topics such as wood selection, tool use, workshop maintenance and much more!

ALSO, included with your purchase is a FREE Digital Caliper. With a value of $40, this great device displays measurements in inches with fractions or millimeters, giving you extremely accurate fraction readouts. This caliper is constructed of hardened and ground stainless steel components featuring a large easy-to-read display. The precision-ground measuring faces allow for outside, inside, depth and step measurements. Battery is included, and even includes a carrying case.

Total video-time in this bundle is 11 hours 36 minutes, with these 9 DVDs and detailed topics:

Tricks of the Trade, Volume 1 – 82 minutes.

  • Splinter-Free Table Saw Cuts
  • Repairing Cracks with Baking Soda
  • Battery Charger Rust Remover
  • Square Joints Guaranteed
  • Sharpening a Chisel
  • Magnetic Stop Block
  • Clamping Irregular Shaped Objects
  • Rabbetting on a Jointer
  • Tame Your Belt Sander
  • Handy Metal Work Vise
  • Turning a Cylinder with a Router
  • Finishing Wood With CA Glue
  • Using Washers as Radius Guides
  • Using a Drill Press as a Clamp
  • Setting Depth of Cut on a Jointer
  • Tricks of the Trade, Volume 2 – 77 minutes.

  • Shop-Made Lollipop for Bowl Turning
  • Making Picture Frames on a Router Table
  • Glue Gutters
  • Sharpening a Router Bit
  • Cleaning Your Saw Blades
  • Bending Wood
  • Outfeed Table Calibration on a Jointer
  • Flattening Veneer
  • Hanging Double Doors
  • Square a Framing Square
  • Flattening Wood With Your Router
  • Squaring a Board on a Jointer
  • Sharpening Forstner Bits with a Rotary Tool
  • Tricks of the Trade, Volume 3 – 59 minutes.

  • Boring a Pen Blank
  • Shop-Made Clamp Pads
  • Handy Clamp Rack
  • Small Parts Cutting Solution
  • Easy Grip Clamp Handles
  • Solve Clamping on Band Saw Table
  • Save Your Batteries
  • Pick Up Small Parts
  • Protect Our Air Guns
  • Making a Custom Sanding Block
  • Tangle-Free Power Cords
  • Check for Slipping Router Collet
  • Belt Sander Bench Mount
  • Manage Your Power Cords
  • Drill and Tap Cast Iron
  • Tricks of the Trade, Volume 4 – 97 minutes.

  • Assembly Blocks
  • Cut Any Angle on a Table Saw
  • Easier Cuts with a Scroll Saw
  • Hanging Cabinets Using a French Cleat
  • Hollow-Grinding a Chisel
  • Screw Pockets as Accents
  • Using a Handscrew Clamp as a Vice
  • Make Your Own Dust Collection Elbows
  • Accurately Cutting a Dovetail
  • Muffle Your Compressor
  • Tuning a Smoothing Plane
  • Notch for Starting a Hand Saw Cut
  • Ice Vibration with Hockey Pucks
  • Perfect Miter Gauge Slots
  • Layout Gauges That Make the Cut
  • Shed a Little Light
  • Smokin’ Cool Storage
  • Squaring Stock
  • Truing a Grinding Wheel
  • Preventing Rust on Tools
  • V-Groove for Edge Banding
  • Work Triangle for Shop Layout
  • Tricks of the Trade, Volume 5 – 84 minutes.

  • Deflection in Shelving
  • Perfect 45° Miters
  • Rout a Perfect Dado
  • Get Saw Blades Tight
  • Perfectly Centered Router Base
  • Drawing an Elipse
  • Rout Feet Onto a Box
  • Sand For Perfect Miters
  • Store Your Pipe Clamps
  • Shop Made Abrasive Plane
  • Winding Sticks Find the Twist
  • Fix a Planer that Won’t Feed
  • Off the Shelf Shelf-Hole Jig
  • Custom Screwdriver Handles
  • Getting Finish into Detailed Areas
  • Working with Soapstone
  • Check Jointer Knife Height
  • Protect Table Mounted Routers
  • Custom Made Handles
  • Computer Generated Ovals
  • Best Sheet Stock Options
  • Handscrew Clamp Tip
  • Designing Furniture Dimensions
  • Why Humidify Your Shop
  • Tricks of the Trade, Volume 6 – 61 minutes.

  • Squaring Your Drill Press Table
  • Keyless Drill Press Chuck
  • Drill Bit Holder and Gauge
  • Mirror Reflects Perfect Holes
  • Cross-Sliding Vise
  • Excellent Cuts in Any Sheet Stock
  • Proper V-Belt Tension
  • Sandpaper Cutting Jig
  • Set the Depth of a Biscuit Joiner
  • Cleaning Router Bits with Lacquer Thinner
  • Making Sandpaper Blocks
  • Biscuit Jointer: Shims Create an Offset
  • Cheap and Easy Waterborne Finish Application
  • Set Miter Gauge to Precise Angles
  • Thin Rips on the Table Saw
  • Magna Pads
  • Cut Dowels to Identical Lengths
  • Two Steps to Dadoes
  • Straight-Line Ripping with a Straight Edge
  • Tricks of the Trade, Volume 7 – 75 minutes.

  • Keep Cords Clear
  • Shims for Setting Router Depth
  • Dead-Center Dadoes
  • Proper Plunge Depth for Hinges
  • Double Countersink Closes the Deal
  • Magnetic Fillers
  • Working with Plastic Laminates
  • Applying Plastic Laminates to a Substrate
  • Making Raised Panels on the Table Saw
  • Shop-Made Arts & Crafts Knobs
  • Router Table Push Pad
  • Rise Above the Mess
  • Label Your Router Wrenches
  • Setting Drawer Reveals
  • Tricks of the Trade, Volume 8 – 82 minutes.

  • Shop-Made Sanding Pads
  • Choose the Right Sanding Block
  • Choosing the Right Glue
  • Burp Your Bottle
  • Easy Stave Construction
  • Making a Turning Finish
  • Safe Finishing on the Lathe
  • Stair Tools for Square Cuts
  • Phone Photos for Duplicate Turnings
  • Patina for Brass
  • Use a Rule Guide
  • Getting New Chisels Ready to Use
  • Replacement Drill Press Table Lock
  • Understanding Jointer Snipe
  • In-a-Pinch Zero Clearance Insert
  • Setting Jointer Knives
  • Monster Push Pads
  • Tricks of the Trade, Volume 9 – 80 minutes.

  • Getting Bowl Depth Just Right
  • Stop a Slipping Morse Taper
  • Roughing Gouge for Fast Turning
  • What Size Biscuit?
  • Biscuit as Back Side Splines
  • Understanding Self-Releasing Router Collets
  • Tape for Tighter Dadoes
  • Dadoes on a Dovetail Jig
  • Find Center with a Combination Square
  • No Tool Layout
  • Hide Face Frame Joint Errors
  • Rabbet on the Jointer
  • Tapered Legs on the Jointer
  • Set Miter Gauge to 45
  • Trim Edge Band to a Face
  • Trim Edge Band Ends
  • Perfect 45s on the Miter Saw
  • Watch a preview of this set below:



    FREE Tool: Wixey Digital Calipers with Fractions ($40 Value)

    Wixey Digital Calipers with Fractions is a precision stainless steel caliper that displays measurements in inches with fractions or millimeters. The fractions are displayed using “precise fraction technology” which gives extremely accurate fraction readouts. This caliper is constructed of high-quality hardened and ground stainless steel components featuring a large easy-to-read display. The precision ground measuring faces allow for outside, inside, depth and step measurements. Battery is included. Also includes carrying case.

    Specifications:

    Measuring Length: 6 in. (155mm )
    Resolution:

  • Decimal = .001 in.
  • Fraction = 1/64 in.
  • Metric = .05 mm
  • Accuracy:

  • Decimal = +/- .001 in.
  • Fraction = +/- 1/500 in.
  • Metric = +/- .05 mm
  • Battery: 6 months life; type CR2032 (included)
    Functions:

  • IN /MM
  • ON/OFF
  • ZERO
  • Auto shut off
  • Watch a preview of this product below: