Dovetail jigs significantly shorten the learning curve for cutting great quality dovetails but, like any tool, a dovetail jig has to be set up and used correctly in order for you to get your best work out of it. This class provides you with everything you need to know to cut excellent through, half blind, and rabbeted dovetails on your jig.
Start to finish
A good dovetail begins with material that has been correctly prepared. We’ll take you through the material requirements, and then move on to tweaking your dovetail jig to make sure it’s performing optimally. We’ll also look at:
Router bits required for through and half blind dovetails
Using a guide bushing with the jig
Parts of a dovetail joint
Identifying a drawer front versus drawer side
Handling the router safely and accurately
Getting chip-free cuts
Half Blind, Through, and Rabbeted
Each type of dovetail requires a slightly different set up, but you’ll be able to apply much of what you learn to all three dovetail types. One of the trickiest aspects of using a dovetail jig is correctly setting the depth of the dovetail bit. You’ll leave this class with techniques for diagnosing router bit depth, and how to correct it if necessary, plus easy to use shortcuts for setting depth.
When dovetails go bad
Thanks to George’s many years of watching his students use dovetail jigs, he has seen almost every possible error that can be committed on a dovetail jig. This class takes you, in detail, through steps and procedures that will help prevent you from making those same mistakes, and help you get to great dovetails faster.
In addition to the detailed video help you’ll receive, this class provides you with some downloadable resources and helpful information to print and keep, including a detailed Class Guide you can follow and use as a reminder for the key points of the class instruction.
NOTE: You’ll receive this Class video instruction in two forms: As on-demand streaming video (in your WWGOA Account); and as a physical DVD, mailed to you.
Class Sessions
Session 1: Setting Up
13:26
Want a great dovetail? Start by making sure your material has been machined correctly, and your jig is correctly set up. A handful of great tips and tricks will be the start of you cutting excellent dovetails.
We’ll also identify the router bits and other accessories used for cutting dovetails, how to lubricate your jig and router base, best practices for material prep, and jargon related to dovetails.
Session 2: Half Blinds
36:51
Great half blind dovetails start with proper labeling of the box parts. With that complete we’ll look at setting up the jig so the joint is properly centered on the board, how to accurately position parts in the jig, and what we learn about depth of the router bit from doing test cuts. You’ll also learn how to use a set up gauge to more easily set the depth of the router bit the next time you use the jig.
Session 3: Through Dovetails
22:01
Once again we’ll start with labeling our boards, and then look at positioning the material in the jig for through dovetails. The fit of a through dovetail depends on the size of the sockets, and you’ll learn how to correct the fit as needed. You’ll also see how to use climb cutting to prevent chipping of the boards.
Session 4: Rabbeted Dovetails and Dovetail Mistakes
13:34
Rabbeted dovetails work great for partially inset drawers, but can be a little tricky to produce. We don’t need any special jig accessories to make them, we just need the right set up. A shop-made spacer is the answer, making it easy to correctly position your material for this joint.
Everyone makes mistakes, and George has seen lots of them made on dovetails jigs. He’ll take you through a number of preemptive steps you can take to avoid making those mistakes.
Your Instructor
George Vondriska
George Vondriska is the Editor in Chief here at Woodworkers Guild of America and has been sharing his woodworking expertise since 1986. Apart from conducting classes at his renowned Vondriska Woodworks School, George's passion for teaching has taken him to woodworking shows nationwide and has led him to teach woodworking for prestigious organizations such as Peace Corps/Swaziland, Andersen Window, Northwest Airlines, and the Pentagon. With a wealth of published magazine articles under his belt, encompassing tool reviews and shop improvement projects, George's knowledge and skills continue to inspire woodworkers every day. To discover more about him and his school, visit georgevondriska.com.
Bonus Material
Printable Class Guide PDF
Download and print this guide to complement your Class. It’s a good resource for key steps in using Dovetail Jigs
Class Resources PDF
See this list of products and reference information related to this Class.
Video: Meet Your Instructor
Download this short video to meet your class instructor, George Vondriska.
Video: More about Dovetail Jigs
Download this short video to hear about the value of using dovetail jigs.
Bonus Materials available for download after purchase.
FAQs
How do I know what the Class covers?
Every Class has a free Preview video you can watch, to give you a flavor of the Instructor and the skills or project that will be covered. In addition, the Overview tab includes a thorough written description of the Class. And finally, each Class Session has a brief written summary of the content in that Session, including the length of each Session video. You will get a good feel for the Class content by reviewing these resources.
Do I have to be a Member of Woodworkers Guild of America to purchase a Class?
No you don’t. While Premium Members will receive regular offers for special deals on WWGOA Academy content, Classes are not reserved exclusively for Members. If you buy a Class as a non-member, we’re sure you’d also enjoy having access to our full library of great woodworking videos and articles as a Member, so give it a try.
How do I purchase a Class?
First you should decide that the Class is what you want. Review the Class Preview video and the various written descriptions of the Class and each Session before you purchase, so you have a good understanding of the Class content. When you’re ready to purchase and gain access to the Class, simply click the “Add to Cart” button, and proceed through the Checkout process.
How do I access/view my Class?
Once you’ve paid, you can access/view your Class by going to the MY ACCOUNT section of Woodworkers Guild of America. The MY ACCOUNT link is in the upper right-hand area of the website. Within your MY ACCOUNT, a section labeled “My Content” is where the class you purchased will appear, including a link to watch the video of your Class. You’ll also receive an email confirmation after your purchase, which will include a link to view your Class. You can access your Class as many times as you wish, and you’ll never lose access to your Account information. Just be sure to “Log In” for access to MY ACCOUNT.
Do I have to take the Class right away?
No. Any Class you buy will be accessible to you always. You can view your Class whenever you want, and you can view individual Sessions in whatever order you like.
Is there a limit on the times I can view my Class?
No. Your access never expires. You can view any Class you purchase as many times as you want, whenever you want.
Can I view a Class on my tablet device or mobile phone?
No problem. Most newer-model smartphones or other mobile/tablet devices with an internet connection are able to play the Class videos. Simply Log In on Woodworkers Guild of America, and you can view any Class you’ve bought through the MY ACCOUNT section. Or, you can click on the “View Class” link within the email confirmation you’ll receive upon your purchase.
How do I get access to the Bonus Materials for the Class?
Until you purchase a Class, the Bonus material (any extra videos, download materials, etc.) will not be accessible. Once you purchase a Class, and go to view your Class, each individual Bonus element is accessible by simply clicking on each item. You’ll find the Bonus Materials directly below your main Class viewer frame. You can access the bonus materials as many times as you like and/or save them to your device.
How does the Class Q&A Resource benefit work?
Once you purchase any Class, within the Class viewing page, you’ll have access to post a question, comment or tip in the Class Discussions. This is not a “live chat,” but your Class Instructor and WWGOA contributors will answer posted questions and provide tips regularly. You can also view other Class participants’ questions and input to take part in this virtual dialogue among others who have taken the Class and are willing to share tips, answers, or ideas.
Can I print out Class details?
For any Bonus Material that is a PDF Download, yes you can. Just click on the icon/button for the Bonus element you want, and print with your local printer.
What are PDF downloads?
These are simply documents, plans, or written materials that are formatted in a way to print out and retain for reference. By simply clicking on the icon/link for any PDF Download that is included with a Class, you can print that document on your own printer or simply view the contents on your computer/mobile device.
Are there any system requirements to view the Class video content?
Your Class video content is best when viewed on a computer manufactured in the past couple of years with a good broadband Internet connection (not dialup). We also highly recommend using the latest version of Firefox, Safari, or Chrome as your Internet Browser, though recent versions of Internet Explorer will work as well. The recommended screen resolution is 1024 x 768 or larger.
Why do you need my email?
We need it to acknowledge your purchase of a Class, and send you a confirmation of your transaction. Also, in order to maintain your permanent access to the Class videos, you’ll need to Log In to WWGOA.com. We guarantee that we will not share your email with any third parties. You may receive email updates from Woodworkers Guild of America from time to time, with details of new Classes and updates. You can easily unsubscribe when you receive any email.
Can I get a refund if I don’t like the Class?
Because you’ll have full access to all the materials and content that is presented in the Class immediately, we can’t offer a refund after purchase. Please review the Class Preview video and the various written descriptions of the Class and each Session before you purchase, so you have a good understanding of the Class content.
How do I contact WWGOA Academy?
If your question is about the Class content, please use the Contact Us Link – and you'll receive feedback from the Class Instructor. Even your fellow Class participants may jump in to offer tips and advice from their experience. If you have other questions or need help, you can email us at wwgoasubscription@program-director.net or call us toll-free, at 1-855-253-0822. Service Representatives will be available Monday-Friday, from 8:00 AM to 4:30 PM Central time, excluding normal holidays.
Explore Classes by George Vondriska
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
You may be interested in
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
This site uses cookies and other technologies to track your use of the site that will allow us and our service providers and partners to enhance your experience and deliver relevant content to you. By agreeing to or closing this notice, you understand and agree to such use and data collection. For more information about our privacy practices and your choices, please visit our privacy policy and cookie notice.