"Must-Have Sharpening Techniques + DVD" has been added to your cart.View Cart

Must-Have Sharpening Techniques + DVD

George Vondriska

Class Preview

1:42:56

In-depth Instruction; over 103 mins
On-demand video access anytime
Bonus downloadable PDF resources
Access to class Q&A
Available for purchase: $14.99

Session 1: Sharp or dull?

8:09

A good sharpening class has to start with helping you determine if your tools need to be sharpened. It can be difficult, especially for new woodworkers, to know if the problem lies in technique or tool. There are some very simple tests you can do on your tools to see if they need to be sharpened.

Session 2: Tools of the Trade

9:33

One of the fun things about woodworking is that there are so many ways to do a given task. The same is true of sharpening. You can sharpen tools completely by hand, or you can take advantage of power sharpening techniques. We’ll show you a number of different products that allow you to choose the sharpening approach that’s best for you.

Session 3: Router bits

6:20

It’s easy to quickly dress the carbide wings of a router bit to optimize its performance. Even if a router bit isn’t, technically, dull, it’s not a bad idea to give the cutters a little attention before using it on chip-prone material. This can be the difference between a great cut, and a marginal cut.

Session 4: Bench chisels

20:01

One challenge in sharpening bench chisels is getting the angle just right. You’ll learn a handful of approaches to help you hit the right angle every time. Whether you want to stay low tech and sharpen freehand on a plate of glass, or mechanize your sharpening, we’ve got you covered. Micro bevel? Yep, we cover that too.

Session 5: Plane irons

5:04

Sharpening plane irons is very similar to sharpening bench chisels. You’ll be able to transfer a lot of what you learn about chisels to irons. Once you’ve mastered these techniques you’ll have your planes peeling off paper thin shavings in no time.

Session 6: Lathe chisels

24:40

It isn’t uncommon, on a given turning project, to sharpen your chisels a number of times. The better you get at sharpening lathe chisels the more time you can spend turning. And you’ll get better results off the chisel, which means less sanding. You’ll see how to sharpen lathe chisels on whetstones, the WorkSharp, and how to freehand sharpen on a low-rpm grinder.

Session 7: Card scraper and cabinet scraper

22:50

These tools baffle some woodworkers, primarily because they never learned how to properly sharpen them. Sharpening scrapers is completely different from sharpening other cutting tools. Your goal is not to create a sharp edge, it’s to create a cutting burr. A good burr starts with good prep work. We’ll show you how to achieve both.

Session 8: Forstner bits

6:19

Don’t try to overcome a dull forstner bit by pushing harder. Instead, spend a little time with a rotary tool or file to bring those cutting edges back to life. Your forstner bits should be giving you shavings, not dust. These sharpening techniques will help you bring your bits back to life.

8 Lessons

1 hrs 43 mins

Overview
Instructor
Bonus Materials
FAQs

If you’re using tools in your shop, you need to know how to sharpen them. It’s an old adage, but true, that dull tools are more dangerous than sharp tools. You’re likely to force a dull tool to do what it should be doing, and that leads to accidents. Additionally, your woodworking will be easier and more pleasant when you’re working with sharp tools.

What’s covered in this class

We cover sharpening techniques for a broad array of tools in this class. In addition to covering a lot of tools, the class offers a variety of techniques, from hand sharpening to power sharpening, whetstones to low rpm grinders. You’re sure to find a sharpening approach here that works with your shop, your budget, and your skills. You’ll learn to sharpen:

Router bits
Bench chisels
Plane irons
Lathe chisels
Card scrapers and cabinet scrapers
Forstner bits

Sharpening systems

We realize that each woodworker places different demands on their tools and has a different set up in their shop. As a result, we show you a variety of approaches to sharpening, including:

Whetstones, including silicone carbide, water stones, and diamond stones
Sharpening on a glass plate
Freehand sharpening
The use of sharpening jigs
Low rpm grinder
WorkSharp
Rotary tools

And some great tips

On top of the sharpening techniques, we provide you with great tips and tricks to make your sharpening easier, such as:

How to determine when a tool is dull
Cleaning your cutting tools, which can help you avoid sharpening
How to prevent whetstones from clogging

With the broad array of tips, tricks and techniques offered in this class, you’re sure to be able to keep the cutting edges in your shop at their best.

NOTE: You’ll receive this Class video instruction in two forms: As on-demand streaming video (in your WWGOA Account); and as a physical DVD, mailed to you.

George Vondriska

George Vondriska is the Editor in Chief here at Woodworkers Guild of America and has been sharing his woodworking expertise since 1986. Apart from conducting classes at his renowned Vondriska Woodworks School, George's passion for teaching has taken him to woodworking shows nationwide and has led him to teach woodworking for prestigious organizations such as Peace Corps/Swaziland, Andersen Window, Northwest Airlines, and the Pentagon. With a wealth of published magazine articles under his belt, encompassing tool reviews and shop improvement projects, George's knowledge and skills continue to inspire woodworkers every day. To discover more about him and his school, visit georgevondriska.com.

Bonus materials available after purchase

How do I know what the Class covers?

Every Class has a free Preview video you can watch, to give you a flavor of the Instructor and the skills or project that will be covered. In addition, the Overview tab includes a thorough written description of the Class. And finally, each Class Session has a brief written summary of the content in that Session, including the length of each Session video. You will get a good feel for the Class content by reviewing these resources.

Do I have to be a Member of Woodworkers Guild of America to purchase a Class?

How do I purchase a Class?

How do I access/view my Class?

Once you’ve paid, you can access/view your Class by going to the MY ACCOUNT section of Woodworkers Guild of America. The MY ACCOUNT link is in the upper right-hand area of the website. Within your MY ACCOUNT, a section labeled “My Classes” will appear, including a link to watch the video of your Class. You’ll also receive an email confirmation after your purchase, which will include a link to view your Class. You can access your Class as many times as you wish, and you’ll never lose access to your Account information. Just be sure to “Log In” for access to MY ACCOUNT.

Do I have to take the Class right away?

Is there a limit on the times I can view my Class?

Can I view a Class on my tablet device or mobile phone?

How do I get access to the Bonus Materials for the Class?

Until you purchase a Class, the Bonus material (any extra videos, download materials, etc.) will not be accessible. Once you purchase a Class, and go to view your Class, each individual Bonus element is accessible by simply clicking on each item. You’ll find the Bonus Materials directly below your main Class viewer frame. You can access the bonus materials as many times as you like and/or save them to your device.

How does the Class Q&A Resource benefit work?

Once you purchase any Class, within the Class viewing page, you’ll have access to post a question, comment or tip in the Class Q&A Resource area. This is not a “live chat,” but your Class Instructor and WWGOA contributors will answer posted questions and provide tips regularly. You can also view other Class participants’ questions and input to take part in this virtual dialogue among others who have taken the Class and are willing to share tips, answers, or ideas.

Can I print out Class details?

What are PDF downloads?

Are there any system requirements to view the Class video content?

Why do you need my email?

We need it to acknowledge your purchase of a Class, and send you a confirmation of your transaction. Also, in order to maintain your permanent access to the Class videos, you’ll need to Log In to WWGOA.com. We guarantee that we will not share your email with any third parties. You may receive email updates from Woodworkers Guild of America from time to time, with details of new Classes and updates. You can easily unsubscribe when you receive any email.

Can I get a refund if I don’t like the Class?

How do I contact WWGOA Academy?

If your question is about the Class content, please use the Class Discussion benefit to ask your question online – and you'll receive feedback from the Class Instructor. Even your fellow Class participants may jump in to offer tips and advice from their experience. If you have other questions or need help, you can email us at wwgoasubscription@program-director.net or call us toll-free, at 1-855-253-0822. Service Representatives will be available Monday-Friday, from 8:00 AM to 4:30 PM Central time, excluding normal holidays.