Class
Build an Impossible Table
$39.99
$10.00
At a Glance:
- In-depth Instruction; over 77 mins
- On-demand video access anytime
- Bonus downloadable PDF resources
- Access to class Q&A
Item:
D1375E
Description
I’ve wanted to build an Impossible Table for a long time, and finally did it. These are also called Tensegrity Tables. They’re a great conversation piece because it looks like there’s nothing holding the table up.
My table uses live edge slabs for the top and bottom, and they add another visually interesting detail to the table. You could, alternatively glue up pieces to get the width of pieces you want for top and bottom.
Designing Your Table
I’ll take you through the thought processes I went through as I developed the hanger system for this table. You can apply that to the table you’re going to make.
The Hangers
You’ll hear me talk about the hangers over and over. They’re a very important aspect of the project because, in the end, the table is supported by the structure of the hangers.
Hardware
Cables and eye hooks bring everything together and, like a suspension bridge, are key to holding the Impossible Table up, and keeping it together.
Details
Feet give the table some lift off the floor, and a significant round over eases the corners to give the project a softer look.
Class Sessions
Session 1: About This Project
2:32
The goal of this class is to teach you how to develop your own Impossible Table. The hangers, the vertical components that project up from bottom and down from the top, are a critical element. I’ll take you through my design process. You can replicate my hangers for your table, or take the concepts and create your own hangers. I’ll also teach you how to work with the cables create the “magic” that is the core of an Impossible Table.
Session 2: How I Design Mine
10:00
I laid the entire project out on rosin paper on my workbench. You can get rolls of rosin paper at home centers. With a 36” wide roll at your disposal you can draw the table full size.
I drew the top, bottom and feet and did it all full size. My goal is to make this table 20” tall, a nice height for a side table. Next, I could start working on the layout of the hangers.
It’s very handy to have rosin paper in your shop. Use it for drawings like this, and to protect your benches from finish and glue.
Session 3: Cut Your Parts
2:38
There are a number of ways you can pull the material you need for an impossible table together. I worked with a birch live edge slab, but you could also glue up pieces to get the width you need for the top and bottom.
A fun aspect of this project is that you don’t have to build it to set dimensions.
Session 4: Cut The Tenon and Half Lap
25:30
You need to work through a distinct series of operations to make your parts and create the joinery. It’s important that the half-lap and mortise and tenon joints are correctly cut so you have the strength you need in the joinery. I’ll take you through this step by step to make sure you get it right on your table. The mortise is made with a plunge router. The tenon and half-lap are done on the table saw.
Session 5: Locate The Hangers
3:44
There are a few tricks you need to know to locate the hangers on the bottom of the top and the top of the bottom. It’s important for the mortises to be located in just the right spot. This creates proper alignment of the hangers and the joining cable. Don’t worry, I’ve got you covered.
Session 6: Create The Hanger Joint
2:37
In this step you’ll grab your plunge router and, using the layout lines from the previous step, create the mortise that the hanger tenon fits into.
Session 7: Get Ready for Pre-Finishing
4:20
It’s much easier to finish this project before assembly, but you need to take a few steps before finishing. This involves rounding corners and predrilling for screw eyes.
I’ll show you how to protect your joints so you don’t get finish in the mortise or on the tenon that could affect the glue bond.
Session 8: Install The Hangers
4:30
Once the finish is dry assembly can begin on the table. I elected to not use yellow glue for this joint. You’ll see why. This joint took some creative clamping. I’ll show you how to use a spacer and a crossbar to secure the hanger while the glue dries.
Session 9: Final Assembly
20:54
Everything is set and the table is ready for hardware!! This is tricky. We’re building a suspension bridge here, kind of. But thanks to the use of stilts and a defined build sequence, installing the hardware isn’t too tough.
Once the screw eyes and cables are installed, you’re ready for your great conversation piece to find a space in your home.
Your Instructor
George Vondriska
George Vondriska is the Editor in Chief here at Woodworkers Guild of America and has been sharing his woodworking expertise since 1986. Apart from conducting classes at his renowned Vondriska Woodworks School, George's passion for teaching has taken him to woodworking shows nationwide and has led him to teach woodworking for prestigious organizations such as Peace Corps/Swaziland, Andersen Window, Northwest Airlines, and the Pentagon. With a wealth of published magazine articles under his belt, encompassing tool reviews and shop improvement projects, George's knowledge and skills continue to inspire woodworkers every day. To discover more about him and his school, visit georgevondriska.com.
Bonus Material
Build an Impossible Table - Resources
Bonus Materials available for download after purchase.
