George Vondriska

WWGOA LIVE! September 2019

George Vondriska
Sign in
Duration:   1  hrs 1  mins

Thanks for tuning in. Here’s what we covered.

2:00 George’s new old router
6:00 Dado head on a Delta table saw?
7:15 Breadboard end on 42” wide table
8:45 Veneer on Lane Hope Chest
9:50 Box joint blade vs dado head for box joints
11:15 Hardwood suppliers in the Mpls/St Paul area
13:00 Good beginner project
14:40 Good skills for beginner woodworkers
16:50 Wood for 3D CNC work
19:00 Dimple a framing square to make it square
22:40 New Axiom air filter
23:00 Kreg Accu Cut, DeWalt track saw
28:00 Squaring panels
29:15 Cheap way to install dust collection
30:10 Dust collector advice
31:40 Bandsaw tuning
33:00 Dust collector remote
36:50 Wooden shop floor vs concrete
39:40 Angles for curved lid of treasure chest box
40:00 Crosscut sled, cutting large panels
42:00 Banjo comes loose
43:40 Grounding a dust collector
44:00 Air compressor plumbed?
45:20 Wall art. Glue over stain?
46:20 10” miter saw advice
47:50 Magport quick connects
48:15 DeWalt planer dust collection
48:30 Resawing on a Laguna bandsaw
49:00 Plans for George’s workbench
50:15 Narrow raised panels
52:00 Beginner CNC book
53:50 Stopped cut on router table
55:20 Stuff in George’s shop
57:00 Closed captioning
58:00 George’s teaching schedule

WWGOA LIVE is brought to you by:
tb-logo

Woodworking Projects for the Home

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

14 Responses to “WWGOA LIVE! September 2019”

  1. Erik Seineke

    Will You please include information about the highest level of art in wood, i.e., Sam Maloof - Thank You, in advance - Erik

  2. George S Single

    Hi George here is a tip for you when clean your Drum sander paper, Get like a large plastic container with a screw lid and fill it with about 4 inches of Simple Green and let soak for a few hours then brush with a plastic brush and Rinse and Hang to dry

  3. jim armbrust

    Thanks George from Wichita, KS, for another great Q&A session!

  4. Jeff Futch

    Working with large Live Edge Slabs how do you keep them from cupping or Warping after they have been flattened?

  5. Benny

    Can you recommend decent hand planes without breaking the bank

  6. Beasley Sevin

    Love the movie references. I got them both. Made me laugh, thank you.

  7. Guy Habeck

    Talk about the tape measures you have on the end of your miter saw stand.

  8. Guy Habeck

    Yes the audio is great tonight. Cadott, WI

  9. Pete

    Pete from Sooke bc

  10. Dan Schumacher

    Sound is really good tonight

Get exclusive premium content! Sign up for a membership now!