George Vondriska teaches you a neat little trick for creating tighter biscuit joints on your shelving. After filling them with glue and inserting the biscuits into their slots, he places two playing cards between the case side of the shelf and a wooden caul to ensure adequate pressure in the right places. This will allow the glue to dry uniformly and seamlessly across the entire edge of the shelf.
When creating a cabinet door, it is critical to keep the wood flat and square. George Vondriska provides practical tips on how to assemble door panels using a parallel jaw clamp. A WoodWorkers Guild of America (WWGOA) original video. Steel Bar Clamps provided by Jorgensen. For more information, visit www.ponytools.comWatch Now >>
When selecting an aerosol can to finish your woodworking project, pay special attention to the nozzle on the can. Many nozzles give you a choice for the spray pattern you’ll have, and George Vondriska shows why it’s important. A WoodWorkers Guild of America (WWGOA) original video.Watch Now >>
George Vondriska provides tips on how to formulate the board foot measure of hardwood so that you can better assess how much wood you’ll need for your woodworking project and better communicate with the salesman when you go to purchase your wood. A WoodWorkers Guild of America (WWGOA) original video.Watch Now >>
If you’ve ever tried to clamp two pieces together that are cut at less than a 90-degree angle, you know how difficult it is to keep the joint from sliding around before it dries. George Vondriska has a neat trick to resovle this clamping challenge using clamp blocks. A WoodWorkers Guild of America (WWGOA) original…Watch Now >>