Get off on the right foot with your hand planing skills. Adam Peterson shows you how to hold and position the woodworking hand plane along with the the proper motion and pressure shifts to successfully joint an edge.
George Vondriska teaches you a great way to refurbish the push pads you use in your workshop. Instead of just tossing your old push pads out, George recommends cutting off the rubber padding from the bottom of the pad, and screwing the plastic handle to a piece of scrap wood, which you can turn into…Watch Now >>
George Vondriska discusses some of the advantages and disadvantages of the common types of sheet stock you might use in your shop. He’ll teach you what to look for so that you know which material is best for your project, whether its plywood, MDF or melamine. You’ll learn how each type of stock is made,…Watch Now >>
George Vondriska demonstrates a unique way to color wood using a simple iron acetate solution that creates a chemical reaction with the natural tannins in wood. If you are using a wood species with a low level of tannin, George shows you the process for adding tannins so that the iron acetate will have a…Watch Now >>
Make nearly invisible covers for screw heads with plugs cut from the same wood as your woodworking project. George Vondriska guides you through the procedure for cutting plugs using a drill press, plug cutter bit, bandsaw and George’s secret weapon: masking tape.Watch Now >>