WWGOA LIVE! March 2017

George was joined by his daughter, Meg, for the March WWGOA LIVE. She’s not a woodworking expert, but brought her great sense of humor along. It was a very fun session.

0:55 Stacked dado and tenons
1:45 Eval of Trend Air Shield Pro
3:07 Drill chuck for a router?
4:15 Woodworking vs carpentry
5:26 Digital angle gauges
7:17 Rolling material storage project
8:02 Sharpening lathe chisels
11:47 4 x 4, or glue two 2 x 4s?
12:22 Benchtop bandsaws
13:50 Does George like Titebond?
14:28 Titebond II vs Titebond III
15:52 Video on window joinery?
17:00 Setting up a dado head
22:20 Shop-made dado gauge
23:24 SawStop brakes
24:21 HSS or carbide lathe chisels?
26:18 Chatter on the lathe
28:20 Drill Dr?
28:30 Portable table saw advice
30:30 Tape measure recommendation
31:58 Prototyping?
33:56 Humming noise from bandsaw motor
34:56 Wood expansion
36:17 Lubricating a router lift
45:00 George’s bowl turning class
48:35 Router bit for flattening cutting boards
49:55 Wood movement in a dovetailed bar cabinet
53:23 Stain and finish for poplar
54:47 Epoxy to fill cracks, and how to color it
56:29 Blades for table saws and miter saws
57:48 George’s teaching schedule
59:42 When is the next Live?
1:01:30 George’s St Pat’s joke
1:01:50 Meg’s joke

WWGOA LIVE is brought to you by:
tb-logo
wwgoa-10-gift-ideas-banner-v1

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
500 characters remaining

36 Responses to “WWGOA LIVE! March 2017”

  1. John williams

    Good ay George, l know that you don't use handsaws all that often,do you think you can dig one out, and show us the correct way to use a saw set and hand file to sharpen the blade,and what type of handsaws are not reset and only sharpened,on one of your q&a shows please.Thanks Mate. John, Sydney Australia.

  2. PAUL-SAN FRANCISCO

    ON THE QUESTION FROM CHRIS IN THE U.K. ABOUT A FIRST-AID KIT AND YOU MENTIONED ABOUT LOSS OF DIGITS YOU MUST HAVE A CLEAN PLASTIC BAG & ICE AVAILABLE TO PRESERVE IT IN THE CASE THAT IT CAN BE REATTACHED IN SURGERY IN A GOOD AMOUNT OF TIME & IN FAIRLY GOOD CONDITION. I AM IN VOLUNTEER FIRE RESCUE MEDICAL TEAM.

  3. harold

    Your thoughts on the cnc saw download.

  4. VERNON EKSTROM

    I'M IN ARIZONA WHEN MAKING A TOY CHEST IS IT BEST TO START ASSEMBLY WITH THE SIDES AND ENDS THEN THE BOTTOM IF USING POCKET HOLE OR TRY TO ASSEMBLE ON THE BOTTOM

  5. Dennis Shaver

    Thanks George.

  6. Charlie Knapp

    George, do you ever dry your own wood for a project?

  7. engine

    Dave in Stillwater, MN

  8. Greg

    Phoenix, AZ 7pm about 75 F

  9. Ed Straub

    I found out something, if you heat the endgrain put the glue on it and wait 10 minutes, then glue as normal, it really adds strength to the joint.

  10. Greg

    Just beginning to learn to turn wood on a lathe. I've purchased your videos and watched several of your turning videos one line, all of which are excellent. I purchased pine 2x6's from the lumber yard. I thought I'd experiment by plaining flat and gluing up four pine 2x6s 7 inches square in a stack. I mounted the stack on the lathe and formed the bowl. I left it for a few days on the lathe and came back to find several lateral cracks. I assumed the wood was kiln dried. It is in a heated shop. Why did this happen? By the way I'm watching from Saskatchewan Canada.