WWGOA LIVE! June 2018

A few technical difficulties with WWGOA LIVE, but we managed to hold it together and do the live stream. Thanks for watching, and thanks for the great questions.

1:30 cutting chair legs so the chair doesn’t rock
6:03 Shaper vs router
9:12 Casting epoxy
11:00 Recommended lathe chisels
13:28 Why face joint?
16:54 One all around glue?
17:18 Planes; bevel up vs bevel down
17:43 Circ saw blade for plywood
20:12 Plunge router for dovetail jigs?
21:00 Accessories for pen turning
24:10 What gloss of finish on cabinets
24:10 Breadboards ends
27:35 Cleaning up a table saw table
29:00 Types of outdoor glue
32:30 Strength of domino vs biscuit
34:00 Cutting a wedge for a mallet handle
37:00 Workbench, bench top drill presses, bench top bandsaw
39:25 Sharpen a marking gauge
41:30 Shellac or wood conditioner?
42:00 Grit for grinding wheels
43:24 Filling cracks on barn boards
45:03 Round templates for the router
46:42 Jointer recommendations
47:48 Veneer on a humidor
48:54 Domino, Biscuit, Dowel
50:25 Bowl blank from a log
53:00 Replace or sharpen chisels?
53:26 6” disc sander
55:30 Home center material
57:00 Finish for a dining room table
57:42 SawStop bench top saw
58:56 Angles on crown molding
1:00 Acclimating wood to your shop

WWGOA LIVE is brought to you by:
tb-logo

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
characters remaining

37 Responses to “WWGOA LIVE! June 2018”

  1. verdun harris

    how do i sign in i became menber on 11/20 855-25308220mn please send e-mail to let me know- thank you 75 year old woodworker.

  2. Ed C.

    When making crown molding or cove molding what are the best degrees to cut the backs so they equal 90 degrees?

  3. JOHNNY

    I cut my own router circle template using a piece of 1/4inch x 3 inch poplar and put approximate inch marks for a close circle.

  4. Judith Demers

    thank you

  5. Bradley

    Any thoughts on the Saw-Stop Tablesaw versus other brands based on the safety features?

  6. Bradley

    Great looking shop!

  7. Dennis

    George, I want to make a cigar humidifier and veneer the outside. What can I do to the inside since it l be cove cider?

  8. stevie porter

    pointers on how to lay out a log for cutting blanks for bowl turning

  9. Amanda

    I have a set of mediocre chisels that are about to need sharpening my question is should I learn to sharpen these mediocre chisels or should I go and buy a decent set and use those and in time learn to sharpen those

  10. Clay Bearden

    What causes a 6 inch disk sander to act like it has a mind of its own. Most of the time it grabs and moves all over the place. I’ve tried different grits, less more pressure. What am I doing wrong? Thanks!