One of the most common questions we get is, “I have an old [insert tool name], and I need parts for it. Where can I get them?”
I encountered a similar scenario with my favorite belt sander, a Bosch 4×24. Look closely…
The platen broke off. :(
It’s eReplacement Parts to the rescue! They had a platen in stock for this 20-year-old tool.
It was a perfect fit! My belt sander is back in business, and I’m a happy camper.
Next time you’re looking for replacement parts, give eReplacement Parts a try. They may have exactly what you need.
I have a Bosch 3283DVS R.O. sander and need the coupling for the dust extraction port Or the following Bosch parts: 2605411026 (dust bag), 2605702012 (fitting) and 1609200976 (suction pipe). Can’t find them anywhere so any help you can give is appreciated.
Hello Dave,
Thank you for your patience. I would check with these guys: https://www.ereplacementparts.com/bosch-3283dvs-0603283739-random-orbit-sander-parts-c-128_1044_1221.html
Although it does appear that many parts for that unit are no longer available.
Best regards,
Paul
Woodworkers Guild of America
Was a Delta dealer. Now I miss getting parts for my tools!
I am looking for a 12t pinion gear for a craftsman 13in. planer model number 351217430. I have searched on sears, Amazon and ebay without success. I am considering having one made but have no idea what the diameter or pitch are as the gear is completely worn. Anybody have any suggestions?
The company mentioned in this article was https://www.ereplacementparts.com/. According to their site, here is the part, but it is no longer available: https://www.ereplacementparts.com/58112tgear-p-1648615.html.
Paul
They are not the only place to get replacement parts, but they are by far the closest one can get to “One Stop Shopping”. Here’s a tip, whenever I’m looking to buy a used tool, I check out eReplacement.com first to make sure parts are still available, if not, I’ll usually pass on it.
I need a”inner flange” for a Chicago 7-1/4 Circular Saw 63290. Your help will be greatly appreciated.
Yes, indeed!! I have used them several times. Fortunately, each time, they had exactly what I was seeking and they got it pushed out quickly. I shall continue to look to them for replacement parts in the future.
Hey, I’m 75 and it seems like some of my own parts aren’t working with as much fluidity as they did 20-30 years ago. Reckon I could find parts at their store to do the trick??? :-)
I have had both shoulders replaced. Anyone know where I can find some grease fittings that fit?
I have used eReplacement Parts successfully for a number of years for tool and appliance parts. However, they are not infallible. I attempted to find parts for an old Delta 6″ jointer, only to find out that the locking lever is listed as obsolete (unavailable) for the Delta (37-190).
I am looking the upper blade guide support for a RYOBI BAND SAW 9 in. BS903. Can you replace it ? Thanks.
I like repair rather than replace.
I checked eReplacementparts.com with no luck. They did not have the plastic blade guard for my Craftsman table saw. Nor did they have the replacement cover for my Craftsman 4″ belt sander. Ugh!!
Try looking up the parts diagrams of similar tools. I don’t thin Craftsman ever made their own tools so chances are that a similar tools under a different brand will have the same parts. I recently needed a part for an old Craftsman mortising machine which was “no longer availbable”. Matched the diagram to a Delta version of the machine which still had parts availability. Exact match.
I have used them many times. I highly recommend them.
Unfortunately they didn’t have parts for my Delta scroll saw or band saw. Guess those were the ones that go bad first and both saws are over 15 years old.
I have aan old Craftman belt sander am I need replacement part. Can you help me?
Hello Luis,
George found success at https://www.ereplacementparts.com/. I would suggest trying there first. Here is another option: https://www.searspartsdirect.com/brand/0247/craftsman-parts
Paul
I have used both of these sites to get part numbers of unavailable parts which I have then searched for and found on eBay
I have a steel city 14″ deluxe saw in need of replacement trunnions. at this time i am using wood trunnion i made. Any ideas where i can locate a pair?
Hello Richard,
I would look at parts from other manufacturers, as it’s possible that something might prove to be a close enough match to make it work. Here is a source for a multi-vendor trunnion that gets great reviews: https://amzn.to/3IHNrpj
Paul
I’ve used them several times and they are a great resource I highly recommend!
I have used them many times. Not only do they have parts for tools, but appliances as well. Any time I have a broken or failing (anything) I go to their website first. They even have videos showing how to perform the repair on many items.
I’m really glad that you brought this parts source to our attention. I too, have some older favorite tools that I would like to have up and running again.
I just found out about this company yesterday as I needed a replacement v-belt for my DeWalt planer. They had the part and shipped out the same day! So hopefully, it will arrive next week. I was glad to get your endorsement on this company. Thank you
I’ve used them before, and generally they have had what I was looking for, so I agree. A good place to start your search.
SOUNDS INTERESTING TO ME.
Thank You
I have used them a lot I have a ridged 1200 wood lathe that I broke the spindle shaft , they had the part. There great.
I’ve used them with great success.
Can you send this to my email
Hello Tom. Here is the link. https://www.wwgoa.com/article/where-to-buy-parts-for-your-tools/
Thanks
Sarah
Woodworkers Guild of America Video Membership