• 4:31

    Have you ever built a project that incorporated mitered corners, such as a picture frame, and wondered how to strengthen and beautify the mitered joints? The answer lies in adding a spline, which introduces a mechanical reinforcement to the joint, and at the same time adds an element of beauty, particularly when contrasting woods are

    Read more »

    Watch Now >>
  • 7:04

    Often a furniture project calls for cutting a notch out of a panel to wrap around another item for a custom fitted appearance. Case in point: a tabletop that is notched around the legs to showcase the top of the legs for a point of interest. It can be difficult to establish these short cut

    Read more »

    Watch Now >>
  • 2:45

    Have you ever cut a mitered frame and ended up with a piece that was just a tiny bit too short, leaving a gap in your frame? If you haven’t, and all your mitered frames have just fit perfectly right out of the gate, congratulations because you might just be the only one! For the

    Read more »

    Watch Now >>
  • 1:35

    When you build a wood project, there’s a good chance that there will be some glue involved. And when there is glue, there is a high probability of seeing wood glue squeeze out. In fact, if you don’t have some amount of wood glue squeeze out, it is likely that you have not applied enough

    Read more »

    Watch Now >>
  • 16:55

    If you are working on a project and the stock has a crack in it, don’t sweat it. You can reinforce the wood, and at the same time add a beautiful detail by installing a beautiful butterfly joint and “celebrating” the imperfection rather than removing it or attempting to hide it. Once you learn how

    Read more »

    Watch Now >>
  • 2:09

    The table saw is perhaps best known for its prowess in lumber ripping operations, but with a little bit of time and setup, you can also learn how to cross cut like a boss on your table saw. It’s simple to turn your table saw into a precision cross cutting machine, and once you know

    Read more »

    Watch Now >>
  • 2:47

    The table saw is a key participant in many woodworking projects, therefore it is critical to ensure that the saw is performing at its best, and adjusted for perfect accuracy. A well-tuned table saw is capable of producing crisp, square cuts, and helping you to produce projects that come together as nicely as you had

    Read more »

    Watch Now >>
  • Drill vs. Impact Driver
    6:29

    There are lots of cordless tools in the marketplace. Few are as handy as impact drivers and drills. Here’s some great buying advice that’ll help you figure out which of these tools will serve you and your shop the best; impact driver, or drill? Check out this video before you make a buying decision.

    Watch Now >>