Become A MemberJoin
Woodworking Tricks of the Trade

Woodworking Tricks of the Trade – Ultimate 7-DVD Set

$89.99

7-DVD Set: Woodworking Tricks of the Trade – Ultimate

In this premier woodworking DVD set, George Vondriska and our team of professional craftsmen present you with nearly 9 hours of shop-tested tips and techniques that you can use to expertly plan, craft and finish your next woodworking project. We’ve created the internet’s best in-depth tutorials on essential woodworking topics such as wood selection, tool use, workshop maintenance and much more! 536 minutes.

Volume 1 – 82 minutes.

Chapter Topics:

  • Splinter-Free Table Saw Cuts
  • Repairing Cracks with Baking Soda
  • Battery Charger Rust Remover
  • Square Joints Guaranteed
  • Sharpening a Chisel
  • Magnetic Stop Block
  • Clamping Irregular Shaped Objects
  • Rabbetting on a Jointer
  • Tame Your Belt Sander
  • Handy Metal Work Vise
  • Turning a Cylinder with a Router
  • Finishing Wood With CA Glue
  • Using Washers as Radius Guides
  • Using a Drill Press as a Clamp
  • Setting Depth of Cut on a Jointer
  • Volume 2 – 77 minutes.

    Chapter Topics:

  • Shop-Made Lollipop for Bowl Turning
  • Making Picture Frames on a Router Table
  • Glue Gutters
  • Sharpening a Router Bit
  • Cleaning Your Saw Blades
  • Bending Wood
  • Outfeed Table Calibration on a Jointer
  • Flattening Veneer
  • Hanging Double Doors
  • Square a Framing Square
  • Flattening Wood With Your Router
  • Squaring a Board on a Jointer
  • Sharpening Forstner Bits with a Rotary Tool
  • Volume 3 – 59 minutes.

    Chapter Topics:

  • Boring a Pen Blank
  • Shop-Made Clamp Pads
  • Handy Clamp Rack
  • Small Parts Cutting Solution
  • Easy Grip Clamp Handles
  • Solve Clamping on Band Saw Table
  • Save Your Batteries
  • Pick Up Small Parts
  • Protect Our Air Guns
  • Making a Custom Sanding Block
  • Tangle-Free Power Cords
  • Check for Slipping Router Collet
  • Belt Sander Bench Mount
  • Manage Your Power Cords
  • Drill and Tap Cast Iron
  • Volume 4 – 97 minutes.

    Chapter Topics:

  • Assembly Blocks
  • Cut Any Angle on a Table Saw
  • Easier Cuts with a Scroll Saw
  • Hanging Cabinets Using a French Cleat
  • Hollow-Grinding a Chisel
  • Screw Pockets as Accents
  • Using a Handscrew Clamp as a Vice
  • Make Your Own Dust Collection Elbows
  • Accurately Cutting a Dovetail
  • Muffle Your Compressor
  • Tuning a Smoothing Plane
  • Notch for Starting a Hand Saw Cut
  • Ice Vibration with Hockey Pucks
  • Perfect Miter Gauge Slots
  • Layout Gauges That Make the Cut
  • Shed a Little Light
  • Smokin’ Cool Storage
  • Squaring Stock
  • Truing a Grinding Wheel
  • Preventing Rust on Tools
  • V-Groove for Edge Banding
  • Work Triangle for Shop Layout
  • Volume 5 – 84 minutes.

    Chapter Topics:

  • Deflection in Shelving
  • Perfect 45° Miters
  • Rout a Perfect Dado
  • Get Saw Blades Tight
  • Perfectly Centered Router Base
  • Drawing an Elipse
  • Rout Feet Onto a Box
  • Sand For Perfect Miters
  • Store Your Pipe Clamps
  • Shop Made Abrasive Plane
  • Winding Sticks Find the Twist
  • Fix a Planer that Won’t Feed
  • Off the Shelf Shelf-Hole Jig
  • Custom Screwdriver Handles
  • Getting Finish into Detailed Areas
  • Working with Soapstone
  • Check Jointer Knife Height
  • Protect Table Mounted Routers
  • Custom Made Handles
  • Computer Generated Ovals
  • Best Sheet Stock Options
  • Handscrew Clamp Tip
  • Designing Furniture Dimensions
  • Why Humidify Your Shop
  • Volume 6 – 61 minutes.

    Chapter Topics:

  • Squaring Your Drill Press Table
  • Keyless Drill Press Chuck
  • Drill Bit Holder and Gauge
  • Mirror Reflects Perfect Holes
  • Cross-Sliding Vise
  • Excellent Cuts in Any Sheet Stock
  • Proper V-Belt Tension
  • Sandpaper Cutting Jig
  • Set the Depth of a Biscuit Joiner
  • Cleaning Router Bits with Lacquer Thinner
  • Making Sandpaper Blocks
  • Biscuit Jointer: Shims Create an Offset
  • Cheap and Easy Waterborne Finish Application
  • Set Miter Gauge to Precise Angles
  • Thin Rips on the Table Saw
  • Magna Pads
  • Cut Dowels to Identical Lengths
  • Two Steps to Dadoes
  • Straight-Line Ripping with a Straight Edge
  • Volume 7 – 75 minutes.

    Chapter Topics:

  • Keep Cords Clear
  • Shims for Setting Router Depth
  • Dead-Center Dadoes
  • Proper Plunge Depth for Hinges
  • Double Countersink Closes the Deal
  • Magnetic Fillers
  • Working with Plastic Laminates
  • Applying Plastic Laminates to a Substrate
  • Making Raised Panels on the Table Saw
  • Shop-Made Arts & Crafts Knobs
  • Router Table Push Pad
  • Rise Above the Mess
  • Label Your Router Wrenches
  • Setting Drawer Reveals