What is the best piece of equipment you can buy to cut a square hole in a piece of wood and what is the best way to cut a square hole?–any size from 1/2″ to 2″ square?
Submitted by rwhayes323Answer:
There are many ways to cut a square hole. One method is to layout the hole and drill away most of the waste using a Forstner bit whose diameter is as close to the hole’s width as possible. If the hole goes all the way through the work piece, then use a scroll saw to cut the square sides. If the hole goes only part way through the work piece, then use a chisel to cut the square sides.
BruceDo you have a question for WWGOA? Ask us on Facebook or email firstname.lastname@example.org. Note: questions may be edited for clarity and relevance.