• 3:45

    Using the Kreg Crosscut Station for Accurate Cuts

    If you’re looking for an accurate way to do crosscuts in and out of your shop you should have a look at Kreg’s new Crosscut Station. It’s a great problem solver, providing an accurate way to crosscut material up to 12” wide using your circular saw. It works with left or right blade circular saws.…

    Watch Now >>
  • 5:44

    Easily Transfer Pics to Wood

    Wouldn’t it be nice if you could run a nice chunk of wood through your ink jet printer to lay down a color image onto your project? Of course it would, but most of us have enough problems with our home technology as it is without trying a stunt like that. Fortunately, there is a…

    Watch Now >>
  • 5:31

    Testing the Cordless Dremel Ultra Saw

    Lots of people who work with their hands do more than one thing. Woodworking might be your primary hobby, but chances are you also work on cars, or fix up your house, or do plumbing repairs, or countless other DIY tasks. We had a look at Dremel’s new Ultra Saw to see if it could…

    Watch Now >>
  • 4:57

    CNC 3D Machine Carving

    A wide array of amazing 3D clipart is available. 3D clipart, and the resulting carvings, will add a unique touch to your woodworking projects. If you don’t like sanding (and who does?) make sure you do these carvings with the right bits to ensure the best cut quality. 3D clipart If you don’t have the…

    Watch Now >>
  • 8:32

    BenchTop Oneida Dust Collector

    When it comes to dust in your shop, it’s important to understand the cumulative adverse effect dust can have on you. You may not react adversely to it today, but that doesn’t mean you won’t later, due to exposure. Additionally, it’s just plain bad for you to inhale dust. The new BenchTop Dust Collector from…

    Watch Now >>
  • 3:24

    Stop and Restart Your CNC Tool Path

    There are times when you can’t allow a CNC tool path to run completely from start to finish. Some CNC toolpaths, like 3D carvings, have exceptionally long run times. It’s also possible that you simply get called away from your shop and have to stop running your CNC mid-toolpath. Please don’t leave your CNC router…

    Watch Now >>
  • 5:28

    Picture Perfect Frames

    Making picture frames is an extremely popular wood shop activity. What better way to show off that special picture than by making a special frame for it. Unfortunately, getting great miters can be challenging. MiterSet provides a great solution for this problem. How does MiterSet work? MiterSet is a block with a series of holes…

    Watch Now >>
  • 6:27

    George’s Upgrade to LED Lights

    The lighting in George’s shop was due for a change; an upgrade to LED lights. This video isn’t meant to be a comprehensive how-to. It’s more of a 100,000’ view of the decisions George made about his new LED workshop lights. Looking at upgrading George’s shop has 8’ fixtures that take two T12 bulbs, and…

    Watch Now >>
  • 6:46

    Locating Drawer Slides in a Case

    We’ve all been there. You’ve built a beautiful set of drawers and it’s time to install them into the case using drawer slide hardware. How do you know where to put them so that the spacing is even between each drawer as well as the top and bottom of the case opening? You know that…

    Watch Now >>