• wga-013032f_d1h70u_c-vcarve-pro-software-test-version-free
    4:31

    Lots of CNC machines use VCarve Pro for the design aspect of using a CNC. If you’ve considered getting into CNC work, but wondered how complex VCarve Pro might be to use, there’s great news. You can test the software on your own computer, for free. What you get The trial version of VCarve Pro

    Read more »

    Watch Now >>
  • 011933f_d1h39u_c
    11:23

    When you need wide pieces for a project and don’t want to use sheet stock, man made material, you’ll be doing a panel glue up; gluing pieces edge to edge. There are a handful of things that need to happen to create a successful edge to edge glue up. A well constructed panel glue up

    Read more »

    Watch Now >>
  • 012797f_d1h55u_c-bessey-edge-clamping-solutions
    10:03

    Lots of projects call for some kind of edge banding. The edge banding might be thin pieces you’re applying to European style cabinet cases, slightly larger pieces you’re applying to the edge of a shelf to make it more rigid, or exceptionally thick pieces being added to a bar or table edge. All of these

    Read more »

    Watch Now >>
  • kreg-pocket-hole-picture-frame
    11:39

    How many times have you been asked to make a picture frame for someone? Many, I bet. Here’s a great approach to making picture frames that doesn’t require any mitering, AND creates a cool accent by making pocket pocket holes the main joinery method. Hiding the pocket holes Making pocket holes is easy, and pocket

    Read more »

    Watch Now >>
  • WGA 011935f_d1h41u_c Kreg - Clamping Solutions
    4:52

    Looking for cool clamping solutions for your shop? The new Automaxx clamps from Kreg are worth a look. They provide excellent clamping power and, amazingly, they auto adjust to varying thicknesses of stock. No fussing with the clamp capacity; just squeeze and go. Applications Kreg makes their Automaxx clamps in a variety of configurations. Whether

    Read more »

    Watch Now >>
  • 011771f_D1H36U_c
    8:50

    This is Part 3 in our three-part series on building a live edge table. In this installment we’ll flatten the slab, apply finish, and install our legs. The legs we chose are steel hairpin legs, which really complement the design. Flattening We’re working with a maple burl, which means the grain is going in many

    Read more »

    Watch Now >>
  • 011770f_D1H35U_c
    13:08

    This is Part 2 of our three-part series on building a live edge table. In this installment we’ll look at bookmatching our pieces, design considerations when working with slabs, and getting the slabs joined using steel pins. Beauty in the eye…. There’s no one right way to put projects like this together. Be ready to

    Read more »

    Watch Now >>
  • 011769f_D1H34U_c
    4:30

    Live edge projects (also called natural edge) can be absolutely stunning. The slabs are typically not square or rectangular, so working with them can be a little tricky. In this three-part project series we’ll take you through the steps we followed to make a gorgeous live edge table. Material A variety of species and looks

    Read more »

    Watch Now >>
  • 011763f_D1H28U_c
    9:51

    If you’re making woodworking projects, you need to put finish on them. This may have you interested in an HVLP sprayer for your shop. HVLP (high volume low pressure) sprayers have really advanced in recent years. One of the largest benefits of HVLP is the limited overspray you get when using them. The package The

    Read more »

    Watch Now >>