• Laying Out Circular Rails
    5:30

    Laying Out Circular Rails

    Building the circular rails for a round table can be intimidating. Master woodworker George Vondriska breaks down the steps using a straightforward approach, and you might be surprised to see how stress-free you can make this rather difficult woodworking process.

    Watch Now >>
  • Know Your Hand Planes
    2:54

    Know Your Hand Planes

    There are many different styles and shapes of hand planes, so it is important to know how to optimize your use of each type when completing your woodworking projects. Master woodworker George Vondriska discusses when to use a scrub plane, smooth plane, and block plane.

    Watch Now >>
  • How to be a Belt Sander Pro
    2:22

    How to Be a Belt Sander Pro

    A belt sander is a powerful woodworking tool if you know how to use it correctly. In this video, master woodworker Bruce Kieffer gives you some of his belt sanding tips and explains how to avoid project disasters!

    Watch Now >>
  • Hose Clamps as Woodworking Clamps
    1:43

    Hose Clamps as Woodworking Clamps

    Master woodworker George Vondriska shows you how simple radiator-style hose clamps can be used as woodworking clamps to tackle any oddball clamping needs in your workshop.

    Watch Now >>
  • Using Felt Clamp Pads
    1:36

    Using Felt Clamp Pads

    Clamps without pads on the contact points can mark the surface of your project. You will learn from master woodworker George Vondriska how to apply inexpensive felt clamp pads to any clamp in your workshop to protect your woodworking project from unwanted blemishes.

    Watch Now >>
  • Easier Clamping on a Band Saw Table
    4:33

    Easier Clamping on a Bandsaw Table

    It can be tricky to clamp fences and jigs to the top of a cast iron band saw table because the webbing on the underside of the table gets in the way of your clamps. Fear not, George Vondriska teaches you a simple technique to create a flush surface on the bottom of your band…

    Watch Now >>
  • Drill & Tap Cast Iron
    5:02

    Drill and Tap Cast Iron

    Woodworkers drill holes in wood all the time but hesitate when it comes to cast iron. Threaded holes in cast iron machine tables are just the solution you need for holding jigs and fixtures. George Vondriska shows how to cut a threaded through or blind hole in cast iron with a center punch, drill, tap…

    Watch Now >>
  • Do I Really Need An Impact Driver?
    1:34

    Do I Really Need an Impact Driver?

    Seeing is believing! Watch this demonstration and don’t be surprised if your next tool purchase is an impact driver. For more information about impact drivers check out the related impact driver product review.

    Watch Now >>
  • Cutting Plugs / Using Plug Cutters
    5:41

    Cutting Plugs and Using Plug Cutters

    Make nearly invisible covers for screw heads with plugs cut from the same wood as your woodworking project. George Vondriska guides you through the procedure for cutting plugs using a drill press, plug cutter bit, bandsaw and George’s secret weapon: masking tape.

    Watch Now >>