• 3:12

    Dado joints are a powerful way to hold shelves and other cabinet carcase components securely. These joints are relatively easy to execute, and due to their effectiveness and efficiency they are a mainstay in many cabinet shops. Most stacked dado sets include multiple chipper sizes, commonly 1/16” and 1/8”, to give you some flexibility in

    Read more »

    Watch Now >>
  • 4:46

    Owning a motorized jointer in your woodworking shop is a real game changer. It allows you to take an imperfect board, and create a perfectly flat faces and edges, whereas this would take much more skill and patience if you were stuck with only hand tools to perform these operations. While a motorized jointer is

    Read more »

    Watch Now >>
  • 8:19

    Perhaps you are just getting started in woodworking and you don’t have a jointer in your shop. Or, if you are fortunate enough to have a jointer, there are situations where the boards that you want to joint exceed the capacity of your jointer. Sure, if you have money and space you can always use

    Read more »

    Watch Now >>
  • 2:53

    Even veteran woodworkers can find it challenging to establish solid clamping pressure when gluing up mitered projects such as picture frames or mitered face frames. Clamping miters is tricky because if you use any traditional clamping approach, the clamping pressure that you apply will immediately force the miters to slide out of alignment. Therefore, if

    Read more »

    Watch Now >>
  • 4:31

    Have you ever built a project that incorporated mitered corners, such as a picture frame, and wondered how to strengthen and beautify the mitered joints? The answer lies in adding a spline, which introduces a mechanical reinforcement to the joint, and at the same time adds an element of beauty, particularly when contrasting woods are

    Read more »

    Watch Now >>
  • 2:22

    As much as everyone seems to dislike the sanding phase of a woodworking project, all sanding is not created equal. When we are sanding on flat surfaces such as a table top, at least we can use a belt sander, sheet sander or random orbital sander to power though the process. Sanding irregular surfaces such

    Read more »

    Watch Now >>
  • 7:04

    Often a furniture project calls for cutting a notch out of a panel to wrap around another item for a custom fitted appearance. Case in point: a tabletop that is notched around the legs to showcase the top of the legs for a point of interest. It can be difficult to establish these short cut

    Read more »

    Watch Now >>
  • 2:45

    Have you ever cut a mitered frame and ended up with a piece that was just a tiny bit too short, leaving a gap in your frame? If you haven’t, and all your mitered frames have just fit perfectly right out of the gate, congratulations because you might just be the only one! For the

    Read more »

    Watch Now >>
  • 1:50

    Have you ever wondered how to weather wood? Sometimes a project calls for a weathered look that just cannot be created with new wood and conventional finishing products because our typical finishing approaches render a look that is, well, just too new. Sure, you can sometimes find weathered wood for sale that has been salvaged

    Read more »

    Watch Now >>