• 7:07

    Here’s one of the weirdest projects George ever did: he filled a mold with brass casings, poured epoxy over the top of them, let it cure and turned the whole thing into a bowl. The result; a bullet bowl. OK, they’re not bullets, but it makes for a cool name. You may never do an…

    Watch Now >>
  • 5:15

    Turning a natural form on a lathe, and keeping the bark and natural tree profile intact as you rough out and shape the bowl is a satisfying process. While live edge bowl turning is extremely fun, for people who are new to this art form, there can be some intimidation about the sequence of events.…

    Watch Now >>
  • 4:01

    If you enjoy woodturning, you surely spend some time preparing turning blanks. Sometimes it’s nice to work with thick stock and simply cut it to the dimensions that you need. But other times, you might not have thick enough stock, or perhaps you just want to incorporate some different colors into your project to enhance…

    Watch Now >>
  • 13:00

    Everyone is talking about CBN (Cubic boron nitride) grinding wheels, and what they bring to the sharpening world. I set up a CBN bench grinder and put it through its paces to see what the hype is all about. Man, these babies are amazing. What’s the set up? CBN wheels are mounted on a low…

    Watch Now >>
  • 5:50

    When I turn bowls, I primarily work with green wood, meaning it’s dripping wet. Its moisture content could easily be around 30%. It’s easy to find wood that’s in that condition. The challenge is keeping it that way until you find the time to do the turning. Here’s the trick for this that I like…

    Watch Now >>
  • 14:36

    A hollow vessel is a beautiful, delicate object that is lightweight, has a very small opening, and invites all sorts of questions about how it was made. Turning a hollow vessel on a lathe is a challenging project, but it is an accomplishment that is fun, exciting, and within reach of an experienced turner when…

    Watch Now >>