• 6:06

    When I walk up to my miter saw and make a cut, I want to know for a fact that the cuts I’m making are accurate. Whether I’m making a 90-degree cut, an angled cut or a beveled cut, I put the same demands on the saw; do what I’m asking you to do. Accurately.

    Read more »

    Watch Now >>
  • 2:24

    Have you ever bought a router table insert or router lift and wondered what the threaded pin is for that comes with the unit? It’s called a router table starter pin, and it can be a great asset for you when routing small pieces on your router table. So, whatever you do, don’t toss it

    Read more »

    Watch Now >>
  • 3:21

    Want to get more life out of your sandpaper? If you’ve been wondering how to clean sanding belts, good news is, it’s easy. All you need is an abrasive cleaning stick. Especially important on drum sanders Of course we want to get more life out of every piece of sandpaper we use in the shop,

    Read more »

    Watch Now >>
  • 5:06

    If you are making a plaque or a picture frame and want to integrate a slot into the project so that the user can easily hang the piece on a wall without having to use hanging hardware, there is a special router bit called a keyhole bit that can be used for this purpose. The

    Read more »

    Watch Now >>
  • 2:39

    Need to make a dado or two? Not everyone knows this, but you can make dadoes on your miter saw. Yep, on your miter saw. No need to put a dado head on your table saw, or set up a router bit in a hand-held router or on a router table. If your miter saw

    Read more »

    Watch Now >>
  • 4:55

    If you’re working wood, you’re probably clamping parts together. That means you need to have good quality clamps in your shop. It’s really hard to beat the benefits of parallel jaw clamps. Why parallel jaw clamps? I tell you what. The feature I like the best about parallel jaw clamps is that the jaws stay

    Read more »

    Watch Now >>
  • 1:56

    If you think that framing squares only belong on a construction job site, you couldn’t be more wrong. They’re also very useful to have in your shop. Here’s a great example. Need to find the center of a circle? You may not believe it, but you can easily do this with a framing square. There

    Read more »

    Watch Now >>
  • 4:42

    A CNC machine allows you to create projects with exceptional details, providing a means of producing great results with outstanding consistency. For example, you can engrave letters with a CNC that look like they were created by a master wood carver. Or, you will have no problem carving artwork with a CNC, even if you

    Read more »

    Watch Now >>
  • 1:58

    Using a jointer isn’t as simple as pushing a piece through and hoping for the best, especially when you’re working with pretty, highly figured woods such as birdseye maple, curly maple, and flame birch. There are lots of species that fall into this category, primarily woods that have a lot of figure to them. The

    Read more »

    Watch Now >>