• 10:03

    Lots of projects call for some kind of edge banding. The edge banding might be thin pieces you’re applying to European style cabinet cases, slightly larger pieces you’re applying to the edge of a shelf to make it more rigid, or exceptionally thick pieces being added to a bar or table edge. All of these

    Read more »

    Watch Now >>
  • Hand Cut Edge Banding to Length
    1:05

    Dave Munkittrick teaches you how to hand cut edge banding to length on a plywood shelf. By using a Japanese pull saw and a simple woodworking technique, you’ll be able to safely and smoothly remove any excess edge banding from your shelving.

    Watch Now >>
  • Using Clamping Cauls
    2:13

    Dave Munkittrick talks about why he likes to use refashioned 2x4s as clamping cauls for his woodworking projects. With a pair of cauls, you can apply pressure evenly across whatever wooden surface you are clamping, including edge banding, and avoid ending up with marks or dents in either side of your piece.

    Watch Now >>
  • Applying Thin Edge Banding
    1:57

    Dave Munkittrick teaches you a quick woodworking technique for applying thin plywood edge banding to a piece of hardwood that will be used as shelving for a faceless cabinet. All you’ll need is a thin line of glue, a few evenly spaced micro-pins and a pair of clamps with cauls to achieve uniform pressure.

    Watch Now >>
  • Using Wooden Wedges to Clamp Edge Banding
    4:02

    You may have found that using clamps to apply pressure to a piece with glued-on edge banding can cause the surfaces to not stick uniformly. So George Vondriska teaches you how to utilize clamps and wooden wedges to help hold the edge banding securely against your woodworking project while the glue dries.

    Watch Now >>
  • Trimming Edge Banding on the Router Table
    7:02

    George Vondriska shows you how to trim edge banding for your woodworking projects using a router table. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Perfectly Squared Edge Bands
    1:53

    George Vondriska shares his secret for cutting perfectly square edge bands on your woodworking projects. A WoodWorkers Guild of America original video.

    Watch Now >>
  • How to Trim Edge Bands
    4:47

    Master woodworker George Vondriska shows you how to avoid sanding through the veneers on your woodworking projects by using a router to trim edge bands. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>