diy woodworking
-
3:28How to Set Depth of a Cut on a Jointer
Master woodworker George Vondriksa provides tips on setting the depth of a cut on a jointer for your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
2:36How to Repair Wood Cracks
A natural piece of wood comes with it’s fair share of imperfections and cracks. In this video lesson, master woodworker George Vondriska teaches you how to repair cracks and fill uneven areas in your wood to achieve a smooth finish on your woodworking projects. You might also be interested in: Furniture Leg Repair – How…
Watch Now >> -
2:09How to Plain Saw Logs into Lumber
Master woodworker George Vondriska shows how to plain saw logs into lumber using a backyard saw mill. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
4:20From Logs to Flooring
George Vondriska demonstrates how to use woodworking machinery to make pine logs into planks that you can use as wood flooring. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
5:00Double Taper Using a Taper Jig
Side panels on stools look great with a taper in the front and back, but cutting both tapers so they are the same profile can be frustrating. George Vondriska shows you how to build a taper jig for cutting a double taper on the table saw. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
5:57Designing a Project Piece Using CAD
Using CAD software is becoming increasingly common for woodworkers and furniture designers, but learning how to use it can be intimidating. Bruce Kieffer joins George Vondriska to provide a simple demonstration and show you how designing a project piece using a CAD program may not be as complicated as you think.
Watch Now >> -
8:38Cutting Lumber from Logs
George Vondriska provides tips on how to use a backyard saw mill to cut lumber from logs for your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video. Saw mill provided by Logosol. For more information, visit www.logosol.us.
Watch Now >> -
2:05Comparing Aerosol Can Nozzles
When selecting an aerosol can to finish your woodworking project, pay special attention to the nozzle on the can. Many nozzles give you a choice for the spray pattern you’ll have, and George Vondriska shows why it’s important. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >> -
1:48Coiling a Bandsaw Blade
George Vondriska demonstrates how to properly coil and store a large band saw blade for DIY woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.
Watch Now >>
