It is vital when jointing a piece of wood for your projects that the knives be properly set, and so George Vondriska teaches you a low-tech method for setting jointer knives. You can use a straight piece of plywood to measure the distance from each knife to the outfeed table and make any necessary adjustments, accordingly.
-
5:41
Cutting Plugs and Using Plug Cutters
Make nearly invisible covers for screw heads with plugs cut from the same wood as your woodworking project. George Vondriska guides you through the procedure for cutting plugs using a drill press, plug cutter bit, bandsaw and George’s secret weapon: masking tape.
Watch Now >> -
3:36
Clamping Biscuits
It’s time to drop your standard woodworking clamps and check out these clamping biscuits. Master woodworker George Vondriska teaches you how they work and how they can be an easy solution in your woodworking shop for some of those more difficult-to-clamp joints.
Watch Now >> -
2:29
Belt Sander Bench Mount
Turn your belt sander into a stationary machine. Master woodworker George Vondriska shows you the simplest way to construct a jig that will hold a belt sander securely to your workbench, making it easier and safer to sand typically difficult woodworking projects like small toy parts and irregular shapes.
Watch Now >> -
1:34
Do I Really Need an Impact Driver?
Seeing is believing! Watch this demonstration and don’t be surprised if your next tool purchase is an impact driver. For more information about impact drivers, check out the related impact driver product review.
Watch Now >>