If your to-do list includes building a hall table, and you are looking for a simple way to “get out of the box” by adding some simple curves to a furniture project, this project just might be for you. Our curved hall table plans will give you everything you need including step-by-step instructions, a how-to video, a scaled drawing and exclusive SketchUp files you can download to your own computer.

Discussion
  • (will not be published)

20 Responses to “Curved Hall Table”
  1. Stephen

    I new to your website it look good I yous to build houses for about 25 years and now I want to build furniture it’s definitely a lot harder. Thanks

    Reply
  2. tomlaber

    Please use hearing protection.
    Would a spindle sander be OK or is there too much risk in going past the line?

    Reply
    • WWGOA Team

      Thank you for your inquiry, and for the reminder on the hearing protection. I was sorry to see that I had them around my neck but not on my ears. I am normally a stickler on this but I goofed.
      As far as a spindle sander, yes, you can use this for this operation. I would suggest using the largest diameter spindle that you have, and really take your time. If you apply too much pressure on the workpiece, you will end up with a rippling effect on your surface which will cause an uneven appearance that can become quite pronounced after you apply finish. I would also follow up the spindle sanding with a random orbital sander which should help clean up any minor unevenness.

      Reply
    • WWGOA Team

      Hi, Conrad! This is a Premium video. Please make sure you’re logged in with your username and password to access these plans.

      Reply
  3. frank kauffman

    I really have enjoyed this website – George is an amazing craftsman – my bucket list includes having the opportunity to take a hands on course with George – one can always dream. What do they say – dream big or go home.

    Reply
  4. Jeffry

    Hey guys, tried downloading the plan and I get the following error: This XML file does not appear to have any style information associated with it. The document tree is shown below.

    NoSuchKey
    The specified key does not exist.

    wwgoa/content/uploads/wwgoa/2015/08/Scaled-Component-Drawings-for-Hall-Table.pdf

    2B441ED3CFE5C200

    N3HGgEH67pGKGvH/vSIJsE/gsmoEPMMd9rOBNruXZ0aRKO2wKLN0JwAAnpwDgzoyNwEh7wLth7k=

    What’s the deal?

    Reply
    • Customer Service

      Hello Jeffry,

      Please try the link again. It should work for you now. Sorry for the inconvenience.

      Thanks,
      Becky WWGOA Video Membership

      Reply
  5. Jeffry

    Hey guys, tried downloading the plan and I get the following error: This XML file does not appear to have any style information associated with it. The document tree is shown below.

    NoSuchKey
    The specified key does not exist.

    wwgoa/content/uploads/wwgoa/2015/08/Scaled-Component-Drawings-for-Hall-Table.pdf

    2B441ED3CFE5C200

    N3HGgEH67pGKGvH/vSIJsE/gsmoEPMMd9rOBNruXZ0aRKO2wKLN0JwAAnpwDgzoyNwEh7wLth7k=

    The drawings are not available and won’t download… Why?

    Reply
    • Customer Service

      Hi Jeffry. This has been fixed. We are sorry for any inconvenience.
      Thanks
      Jean-WWGOA Video Membership

      Reply
  6. Rick

    I cannot find a drawing that shows the location for the mortises so I am in the dark as to location of the top of the legs to the rails. I did see a 1/4″ spacer is used during assembly so can I assume this is a gap between the table top and that the legs do not contact the bottom of the table top? Thanks.

    Reply
    • Customer Service

      Hi Rick. Sorry for the omission and thanks for your question. The top of the mortises are placed 1.5″ from the top of the leg, and 3/4″ from the inside edge. You will be receiving an email with a picture attached to help clear up any remaining question.
      Thanks
      Paul-WWGOA

      Reply
  7. Remi

    Good day…Would it be possible to update the links? for example, the Sketchup Files for this project don’t seem to work…thank you

    Reply
    • Customer Service

      Hi Remi. We are sorry you are having trouble with the Sketchup program. Here is the website for Sketchup for assistance. https://www.sketchup.com/
      If you have any questions you can give our customer service team a call at 1-855-253-0822.
      Thanks
      Jean-WWGOA Video Membership

      Reply