WWGOA GOLD LIVE: Resawing on the Band Saw

This WWGOA GOLD LIVE event is all about resawing on the band saw. George Vondriska shows you how to do it the right way and answers viewers questions about the process.

THIS EVENT IS ONLY AVAILABLE FOR WWGOA GOLD AND PLATINUM MEMBERS

Log in now to view the event or become a GOLD Member today by clicking here and choosing the GOLD membership option!

Share tips, start a discussion or ask one of our experts or other students a question.

Make a comment:
characters remaining

70 Responses to “WWGOA GOLD LIVE: Resawing on the Band Saw”

  1. RICHARD

    this is a great video. Lots of good information and well taught. I have the same Laguna Bandsaw and use Laguna blades. The saw has a gauge in side the upper wheel housing that is used for tensioning. I wonder if other bandsaws have the same blade. Why does George use the blades he uses?

  2. jeffmartin086

    what is a good cleaner to use on the blade and rubber on the wheel?

  3. wcs1

    what is a plastic blanking block on a Laguna 14-12

  4. Joshua

    what would the problem BE WITH CUTTING THE VENEER BETWEEN THE BLADE AND THE FENCE?

  5. Gary

    There is an article detailing construction of the single point contact fence on the site here. https://www.wwgoa.com/article/easy-resawing/

  6. BOBBY

    Hello from Waco, Texas. Thanks for the good content! I'm ready to make skinny boards!

  7. Eddie Ferrell

    Murfreesboro,Tennessee

  8. JOE

    I have a 14" Powermatic band saw that does not have the quick relief and blade tighten bar on the back. Is it possible to by an aftermarket bar for my bandsaw?

  9. Tim

    no comment

  10. William

    why is it important to have veneer on outside - you will have to re-adjust every cut. if feed on inside then no re-adjusting necessary...but I am sure I am missing something!