• 6:00

    I have a great job. I frequently get to see cool new tools, and I love having the chance to tell you about them. Here’s an example. The Chatternator is a good example. If you’re making molding on a Woodmaster machine, the Chatternator is a problem solver that can save you A LOT of sanding…

    Watch Now >>
  • 17:06

    If you have a wood lathe, you are probably accustomed to turning pens, spindles, and maybe even bowls. The common denominator is that most of the projects that you produce are probably made of wood. There’s no question that turning wood is one of the most fun things that you can do in a shop.…

    Watch Now >>
  • 4:45

    If your jointer is leaving a divot on the trailing edge of your work piece, it will not only drive you crazy, but it will produce unsightly blemishes on your projects. As you face joint your pieces, that divot will invariably end up in a visible place on your table top or other prominent location.…

    Watch Now >>
  • 9:25

    If you’re interested in building cabinets, you’ll want to learn how to make face frames. If you plan to make a lot of cabinets, such as a set for your kitchen, then efficiency becomes very important. Learning how to make face frames is not hard, but like anything, there are some tips that can help…

    Watch Now >>
  • 10:05

    Track saws and cutting systems that use them are quite the rage. And it makes sense. What a great way to get large pieces cut down to more manageable sizes, straight line rip stock, cut funky angles, and more. But here’s my question: can you use a track saw and cutting system to produce all…

    Watch Now >>
  • 4:22

    Yeah, we use our shops (primarily) for woodworking, but most of us have other things going on in our shops too. In my case, I recently had to bend some metal rod for a shaving horse project. Do you want to know how to bend metal? We’ve got you covered. Let’s turn up the heat…

    Watch Now >>
  • 2:56

    When you’re using tools like a biscuit joiner, Festool Domino or dowel machine, they all have a commonality. They each have a fence that registers the tool on your work. We rely on the fence not only for registration, but also to keep the machine at the correct angle relative to the work. This becomes…

    Watch Now >>
  • 4:19

    When it comes to finishing projects, there can be challenges. Let’s do everything we can to eliminate challenges, and make finishing as simple as possible. Here’s a trick that will help your finishing move along a little faster; finishing both faces of a project in one go. I have to say that for a lot…

    Watch Now >>
  • 3:11

    Most of the time, woodworkers are looking for ways to get rid of the shavings and sawdust from their projects. But every once in a while, when there’s something special about the shavings, you may want to collect and save the sawdust. Here’s a great trick that makes it super simple to grab that cool…

    Watch Now >>