• 1:48

    Tips for More Accurate Pencil Tracing

    It’s pretty common practice to use a pencil to trace one part onto another. Whether you’re copying a buddy’s templates and patterns, or making a new insert for your table saw, pencil tracing is an easy, low tech way to get the shape transferred. However… The problem with this is accuracy. Because of a pencil’s…

    Watch Now >>
  • 9:28

    Cove Cut on the Table Saw

    Let’s say you’re working on a project that requires some cove molding, and your lumber yard doesn’t carry the size that you need. Or maybe you are using an unusual species such as honey locust that you cut down from your neighbor’s yard one evening, and there’s no way that you will find cove molding…

    Watch Now >>
  • 17:43

    How to Build a Cedar Planter Box

    When spring hits, it’s time to get those outdoor plants going so let WWGOA show you how to build a cedar planter box. It’s a lot of fun to plant flowers or veggies (and it’s a great thing to do with kids) and it’s even more fun when you’re putting them in a planter that…

    Watch Now >>
  • 5:00

    Using Your Smartphone as a Digital Angle Gauge

    Setting angles on your tools can be a little tricky, and getting the angles just right is very important. If you’re doing something like stave construction, or any multi-sided item, being off just a few degrees on the set up can lead to disastrous results. But if you own a smart phone, the answer for…

    Watch Now >>
  • 8:05

    Working with Casting Resin

    If you want to get off of the beaten path just a bit in your woodshop, one good way is to explore the possibilities of working with materials other than wood. You’ve seen George work with Antler, brass, and most recently, casting resin. Casting resin opens up worlds of new possibilities because you have the…

    Watch Now >>
  • 9:48

    Gluing Up a Hollow Column

    Gluing up a column, or any multi-sided object, can be a challenge. Getting uniform clamping pressure isn’t easy, unless you use just the right clamp. The key to good (and easy) clamping on multi-sided objects is using a strap clamp. Strap clamps allow you to completely wrap the object, getting perfectly uniform pressure from every…

    Watch Now >>
  • 3:31

    Choosing a Router Base: Flat vs Round Side

    There are lots of aspects of woodworking that are intuitive. Some, not so much. This is an example of not so much. Routers and Fences One way to guide a router through a cut is to attach a fence to the router, allowing the fence to ride along the edge of your work. An alternative…

    Watch Now >>
  • 5:19

    Custom Wood Molding Sled

    Custom wood molding is a great way to dress up any project in your shop or home improvement project. Making custom wood molding is one of those cool skills that can separate you from the pack, as it takes some engineering to do this with a typical set of shop tools. Custom wood molding can…

    Watch Now >>
  • 3:12

    Torching Wood

    Everything old becomes new again! For instance, using a propane torch to char the surface of a piece of wood, changing its color. Torching wood is something that has been around for a really long time. It’s an interesting way to change a wood’s color without using stain or dye. Making it happen Torching wood…

    Watch Now >>