• Cutting Slots on a Router Table with a Spiral Upcut Bit
    4:22

    George Vondriska shows you an easy way to cut slots using your router and router table. You can get accurate cuts using a spiral upcut bit which acts like a drill bit and allows you to easily plunge into the material. Making pencil marks on the router table fence lets you know exactly where to

    Read more »

    Watch Now >>
  • Using Guide Bushings on a Router
    3:07

    Guide bushings are worthwhile additions for your handheld router because they work by cutting away at your specific woodworking project without damaging your shop-made jig. George Vondriska teaches you all about the benefits of working with guide bushings, which come in various diameters and are tremendously helpful when creating dadoes and other difficult aspects of

    Read more »

    Watch Now >>
  • Right Router for Your Shop
    5:02

    George Vondriska discusses some of the pros and cons of three different routers that could be right for your shop. Find out which router makes the most sense for your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Zero-Clearance Router Table Fence
    4:18

    From drawer lock joints to rail and stile doors, it stinks when your projects end up with ugly chips and tear out caused by the router table. A zero-clearance fence is a simple solution to this common problem. Don’t let the chips fall where they may. Eliminate them! A WoodWorkers Guild of America (WWGOA) original

    Read more »

    Watch Now >>
  • Using a Flush Trim Router
    4:06

    Woodworking expert George Vondriska provides tips on how to use a flush trim router bit to cut a chair leg blank, including how to select the correctly sized router bit, set the height of a bit and use patterns to cut perfectly matched pieces. A WoodWorkers Guild of America (WWGOA) original videos. Router bit provided

    Read more »

    Watch Now >>
  • Spiral Router Bits
    3:53

    Spiral router bits have numerous uses in your woodworking projects. Master woodworker George Vondriska shows the two types of spiral router bits and the advantages of each over traditional straight bits. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Simplified Router Fence Setup
    8:43

    George Vondriska provides an easy way to set up a router fence. A WoodWorkers Guild of America (WWGOA) original video. Setup Tool provided by Prazi. For more information, visit www.praziusa.com. More Videos provided by Prazi: Dovetail Jig Buying Advice

    Watch Now >>
  • Making Mortises with a Plunge Router
    6:16

    George Vondriska shows you how to set up and correctly position a plunge router on a woodworking project to cut the perfect mortise. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • How to Turn a Cylinder with a Router
    13:19

    Master woodworker George Vondriska demonstrates the process of turning a cylinder for your woodworking projects by using a router. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>