• Using the Correct Clamps for Edge-to-Edge Glue Ups
    1:55

    Using the Correct Clamps for Edge-to-Edge Glue Ups

    Choose the right clamp for the job. Edge-to-edge glue ups are best done with certain style of clamps. George Vondriska covers some of your options, including parallel jaw clamps, pipe clamps and bar clamps.

    Watch Now >>
  • How to Clamp Irregular Shaped Objects
    1:50

    How to Clamp Irregular-Shaped Objects

    Master woodworker George Vondriska shows you how to successfully clamp irregular shaped objects for your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Clamp Blocks
    4:40

    Clamp Blocks

    If you’ve ever tried to clamp two pieces together that are cut at less than a 90-degree angle, you know how difficult it is to keep the joint from sliding around before it dries. George Vondriska has a neat trick to resovle this clamping challenge using clamp blocks. A WoodWorkers Guild of America (WWGOA) original…

    Watch Now >>
  • Pinch Dogs
    2:41

    Pinch Dogs

    This is not a new breed of dogs, but instead an old woodworking techniques for clamping boards edge-to-edge! Expert woodworker George Vondriska discusses what pinch dogs are and how they work.

    Watch Now >>
  • Making Light-Duty Clamps
    1:30

    Making Light-Duty Clamps

    George Vondriska teaches you about shop-made light duty clamps that are inexpensive and easy to create. Using materials found in any hardware or home store, you can make dozens for the price of manufactured spring clamps.

    Watch Now >>
  • Hose Clamps as Woodworking Clamps
    1:43

    Hose Clamps as Woodworking Clamps

    Master woodworker George Vondriska shows you how simple radiator-style hose clamps can be used as woodworking clamps to tackle any oddball clamping needs in your workshop.

    Watch Now >>
  • Using Felt Clamp Pads
    1:36

    Using Felt Clamp Pads

    Clamps without pads on the contact points can mark the surface of your project. You will learn from master woodworker George Vondriska how to apply inexpensive felt clamp pads to any clamp in your workshop to protect your woodworking project from unwanted blemishes.

    Watch Now >>
  • Easier Clamping on a Band Saw Table
    4:33

    Easier Clamping on a Bandsaw Table

    It can be tricky to clamp fences and jigs to the top of a cast iron band saw table because the webbing on the underside of the table gets in the way of your clamps. Fear not, George Vondriska teaches you a simple technique to create a flush surface on the bottom of your band…

    Watch Now >>
  • Clamping Biscuits
    3:36

    Clamping Biscuits

    It’s time to drop your standard woodworking clamps and check out these clamping biscuits. Master woodworker George Vondriska teaches you how they work and how they can be an easy solution in your woodworking shop for some of those more difficult-to-clamp joints.

    Watch Now >>