• Trimming Edge Banding on the Router Table
    7:02

    Trimming Edge Banding on the Router Table

    George Vondriska shows you how to trim edge banding for your woodworking projects using a router table. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Shaping with an Inflatable Sander
    2:49

    Shaping with an Inflatable Sander

    In this video, George Vondriska demonstrates a useful way to use an inflatable drum sander to sand rounded surfaces on your woodworking projects. Mounted to a lathe, the inflatable sander allows you to decide how much or how little you want to inflate it depending on what you would like to achieve with your sander.

    Watch Now >>
  • 3:50

    Making Your Own Walnut Stain

    Master woodworker George Vondriska shows you how to make your own homemade walnut stain for finishing your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • How to Trim Edge Bands
    4:47

    How to Trim Edge Bands

    Master woodworker George Vondriska shows you how to avoid sanding through the veneers on your woodworking projects by using a router to trim edge bands. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • How to Make Your Own Aerosol Spray
    2:13

    How to Make Your Own Aerosol Spray

    Spraying a topcoat is a great method for applying a finish. But what about those times when you just need to touch up an area or spray a small part? Loading your spray gun is probably not a great solution. George Vondriska shows you a unique way to make your own aerosol spray delivery tool…

    Watch Now >>
  • How to Apply Flocking
    4:30

    How to Apply Flocking

    Master woodworker George Vondriska provides tips on how to apply flocking to wood for your woodworking projects. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • Finish Application Tips
    8:01

    Finish Application Tips

    Finishing can be one of the most stressful or satisfying parts of the woodworking process. After spending so much time and energy on a piece, there’s nothing worse than something going wrong in this important final stage. In this video, master woodworker George Vondriska provides tips on how to expertly apply finish to your woodworking…

    Watch Now >>
  • Choosing a Brush for Your Top Coat
    2:55

    Choosing a Brush for Your Top Coat

    You’ve spent a lot of time on your project getting it ready to finish, so why not finish it right? If you’re going to apply four layers of stains or top coat with a brush, it’s important to use the proper brush for the job. A WoodWorkers Guild of America (WWGOA) original video.

    Watch Now >>
  • CA Glue as a Pen Finish
    7:33

    CA Glue as a Pen Finish

    George Vondriska shows you how to use CA glue as a great alternative wood finish for the pens that you turn. A WoodWorkers Guild of America (WWGOA) original.

    Watch Now >>