• 5:06

    Make a Clock From a Vinyl Record

    Have you ever wanted to make a clock in your shop but couldn’t come up with a creative idea to set your clock apart? Here’s an idea for you, provided that you have access to a CNC machine. If you want to make a clock on a CNC, how about starting with a vinyl LP…

    Watch Now >>
  • 10:18

    CNC: Flattening Cookies

    If you’re like me, you look at a log as a cylinder full of possibilities. It’s full of planks, bowl blanks, and cookies. Yep, cookies. This is a term commonly used for the pieces you get when you crosscut a log into slabs you can use as table tops, or for a variety of other…

    Watch Now >>
  • 3:13

    How to Remove CNC Tabs

    When you want to automate production and bring some precision to a project, nothing beats CNC technology. The world of CNC is exploding these days in a very positive way to bring a spectrum of innovative and economical solutions to production shops as well as hobbyists. While CNC routers can automate many of the tasks…

    Watch Now >>
  • 5:01

    Allowing for Router Bit Diameter on a CNC Machine

    CNC technology can add a lot of value to a woodworking shop in terms of precision, repeatability, efficiency and quality. Once you have an overview of a CNC machine, you will begin to understand the precision in place throughout the system. This is one of those “garbage in, garbage out” scenarios in which the CNC…

    Watch Now >>