• 2:42

    Safely Setting your Table Saw Blade Height

    Setting your table saw blade height is an important step prior to making any cuts. Table saw blades have a tooth geometry that is engineered to deliver ongoing performance throughout the life of the blade. Some of the attributes that have been carefully engineered include blade diameter, thickness, tooth geometry, gullet spacing, material characteristics, etc.…

    Watch Now >>
  • Dovetail sockets in wood near a table saw
    7:47

    Make Dovetail Sockets on your Table Saw

    The dovetail joint is not only one of the strongest joints due to the mechanical strength that it provides, it is also widely considered to be one of the most beautiful joints that you can create. This combination of strength and beauty make dovetail joinery one of the hallmarks of craftsmanship, so it’s a great…

    Watch Now >>
  • Locked rabbets on a table saw
    5:43

    Locked Rabbets on a Table Saw

    If you want a simple but extremely strong way to build drawers or other types of boxes, the locked rabbet joint will be a good member to add to your joinery arsenal. The joint is simple to make because it uses careful placement of a rabbet and a dado that can be milled using a…

    Watch Now >>
  • Table saw
    10:56

    Table Saw: Safe Ripping and Cross Cutting

    The table saw is at the heart of most woodworking shops, so it’s VERY important that you use it correctly and safely. In this video we’ll demonstrate safe ripping and crosscutting on a Laguna Fusion 1 table saw. We’ll cover: – Blade selection, ripping versus crosscutting – The importance of a riving knife – Body…

    Watch Now >>
  • Saw blade
    2:41

    Diablo Steel Demon Circular Saw Blade Review

    Wow!! That’s my very understated reaction to the Freud Steel Demon circular saw blade. I ran across this blade while shopping for circular saw blades at a home center, and was amazed to see that it’s capable of cutting mild steel up to ¼” thick. No way!! I figured it’s time for a circular saw…

    Watch Now >>
  • Cutting a pentagon on a table saw
    5:35

    How to Cut a Pentagon on a Table Saw

    Every now and then our woodworking requires us to rip a work piece to a polygon shape on the table saw. Perhaps you want to cut a pentagon, hexagon, octagon, nonagon, or any other polygon, for a fancy table leg or a post. This can be an intimidating, or even frightening requirement, and if you…

    Watch Now >>
  • Table saw and cylindrical wood piece
    4:13

    How to Safely Rip a Cylinder in Two

    If you need to rip a cylinder in half or quarters for a project, watch this video first. It can be a very dangerous activity if you do not take the necessary precautions. If you attempt to free-hand this cut on a table saw, the cylinder will inevitably roll slightly, creating a binding condition at…

    Watch Now >>
  • Filling knots with epoxy
    9:50

    Making a Continuous Grain Drawer Front

    Have you ever seen a table with a drawer featured as part of the apron, and the grain of the apron flows through the drawer face as if it were cut directly out of the apron without disturbing the surrounding wood? Could it be a magic trick, or are some craftsmen just that superior? Well…

    Watch Now >>
  • Wood boards
    3:05

    Cutting Rabbets on a Table Saw

    One of the really cool things about woodworking? There are SO many different ways to do the tasks we need to do. Here’s a great example; cutting rabbets on a table saw. You might automatically think that you have to own a dado head to do this, or that you’d have to use a router…

    Watch Now >>