• 8:50

    Build a Live Edge Table: Part 3

    This is Part 3 in our three-part series on building a live edge table. In this installment we’ll flatten the slab, apply finish, and install our legs. The legs we chose are steel hairpin legs, which really complement the design. Flattening We’re working with a maple burl, which means the grain is going in many…

    Watch Now >>
  • Sanding Fine Details
    4:18

    Sanding Fine Details

    Sanding detailed, hard to get at, areas like those you might have on carvings or turnings can often times be difficult. Sometimes it’s about the right tool for the job, like this contour sander from Arbortech. Watch as George Vondriska uses the Arbortech sander for sanding the details of an eagle carving and the inside…

    Watch Now >>
  • Abrasive Planing and Sanding on the SuperMax Drum Sander
    11:31

    Abrasive Planing and Sanding on the SuperMax Drum Sander

    George Vondriska teaches you how to use the variable setting drums on an ES Dual Drum Sander from SuperMax to achieve two levels of sanding on your woodworking projects with just one pass through the machine. He teaches you all about the specifications of the machine and then demonstrates some of its unique capabilities, including…

    Watch Now >>
  • Random Orbit Sander Buying Advice
    7:02

    Random Orbit Sander Buying Advice

    George Vondriska recommends adding a Random Orbit Sander from Bosch to your shop to help rid of any unwanted scratch marks or swirls when sanding your latest woodworking project. Typical round or oval-shaped rotary heads spin in one pattern, so you either end up with uneven levels in the wood or a hand cramp from…

    Watch Now >>